CKD SMC Cylinder Price AX4075S-B

The tightness of the AX4075S-B cylinder bolt is insufficient or the material of the bolt is unqualified. The tightness of the cylinder joint surface mainly relies on the tightness of the bolt. The thermal stress and high temperature generated during the start-up and shutdown of the unit or during the increase and decrease of load can cause stress relaxation of the bolt. If the stress is insufficient, the pre-tightening force of the bolt will gradually decrease. If the material of the cylinder bolt is poor, the bolt will be elongated under the action of thermal stress and cylinder expansion force during long-term operation, resulting in plastic deformation or fracture, and the tightness will be insufficient, causing the cylinder to leak. Internal faults of the solenoid valve cause the valve core to move不到位, resulting in the air inlet of the valve to the exhaust port 'crossing air'. It can be seen that for pneumatic components, selection is important, but installation, commissioning, and maintenance are even more important. Many faults are caused by users who are not familiar with the performance and maintenance characteristics of the regulating valve. You cannot isolate the regulating valve from the control system, but need to consider and adjust it together with the entire system. Moreover, the regulating valve is a dynamic actuator, prone to various faults, which is not comparable to manual valves. Moreover, with the increasing promotion of fieldbus regulating valves, tasks that were originally performed by the system are now delegated to the regulating valve, which puts higher requirements on the use and maintenance of the regulating valve. 811C-FM-A61BA-155, 56C-12-591JD35A-ADB-DFSA-1BA-FM, 411A-B0A-DM-DDPJ-1JB M0D:416EMM-P1A-223-B, 825C-PM-501JM-65292B-AAB-BJA-DM-DAAP-1DM-9, 34C-ABA-GDFA-1GA M0D:A073D1-50AGC-2JD1, 92B-000-FAG188B-A62BA-FM, 825C-PM-661JM-652EBM45A-015A-06, 116B-591BAM-07001-01-01P, BV214A-EB1-00-BBJA-CTA M0D:A22067A-C3-BRA-RA M0D:7797, 39089-01-235A-AAB-DFSA-1BA-FM, 117B-111BA45A-SB1-DAAA-1BA, 117B-121BA48A-AMA-000-GDFA-1KA, 130B-111JJ M0D:04581130A-027, 250B-111JA57D-76-611JC, 35A-ACA-DDAA-1BA52A-31-B0B-DM-DDBA-1BA, 411A-D0A-DM-DJBA-1BA33A-AAB-RDFA-1RB, 52A-11-D0A-DM-DJAA-1BA57D-16-611BA, 58D-36-611BA55B-12-PI-571BA, 811C-PM-501BA-125 M0D:0369

Cylinder price AX4075S-B belongs to the Air Pressure Cylinders series under CKD company, model number AX4075S-B. To purchase or inquire about Cylinder price AX4075S-B, you can directly contact 158 0047 0089 (Mr. He).

FAQ

What is the basic function of CKD pneumatic components?

CKD pneumatic components use compressed air as a power source to transmit and convert forces. They can be used to control machine movements, transmit force, or achieve automation. Common pneumatic components include cylinders, pneumatic valves, and pneumatic motors.
What are the main types of CKD pneumatic components?

1. Cylinders: Used to convert the energy of compressed air into mechanical energy to produce linear motion.

2. Pneumatic valves: Used to control the direction, speed, and pressure of airflow, regulating the operation of pneumatic systems.

3. Pneumatic motors: Devices that convert compressed air into rotary motion.

4. Air tubes and connectors: Used to connect various components in pneumatic systems and transmit air.
Do CKD pneumatic components require regular maintenance? If yes, what are the key points?

Yes, CKD pneumatic components require regular maintenance to ensure normal operation and extend service life. Key maintenance points include:

- Regularly check and replace seals and gaskets to prevent air leakage.

- Inspect and clean filters to ensure clean air quality.

- Lubricate moving parts to reduce wear and improve efficiency.

- Check air tubes and connectors to ensure secure and undamaged connections.
How to choose the right CKD pneumatic components?

When selecting the appropriate CKD pneumatic components, consider the following factors:

Application requirements: Understand the specific working environment and tasks, such as load, speed, and stroke.

Air source conditions: Ensure that the pressure and flow of the air source meet the component’s requirements.

Installation space: Confirm available space and choose components of suitable size.

Environmental factors: Consider the temperature, humidity, and potential corrosiveness of the working environment to select suitable materials and designs.
What are common faults in CKD pneumatic component systems and how to troubleshoot?

Common pneumatic system faults include:

Air leakage: Causes efficiency decline; check seals, connections, and tubes, find leak points, and repair or replace.

Stuck cylinder piston: Possibly caused by dirt or insufficient lubrication; clean the piston and add lubricant.

Valve failure: Check electrical control signals, ensure smooth airflow, and verify if the valve itself is damaged.

Insufficient pressure: Inspect air source pressure, filters, and piping to ensure no blockage or leakage.