Shacai (CKD) Double Acting Cylinder CMK2-00-25-220

Common failures of CMK2-00-25-220 pneumatic gripper; through through-hole and locating pin/dowel, through internal thread and locating pin/dowel, as shown in the figure for a single gripper. It includes the lever arm, due to additional load caused by the workpiece or gripper and the acceleration force generated during the movement process. When calculating the torque, the zero coordinate line (gripper guide) must be considered. The moment of inertia of the parallel gripper is referenced to the center axis, without additional gripper and load. The use of sliding bearing guide means that there is a rotational clearance between the gripper and the housing. The rotational clearance values in the table are calculated using the cumulative tolerance method. The opening and closing times shown in the figure are measured at 6 bar under room temperature for a gripper without additional gripper in horizontal installation. When the load [g] increases, the air gripper must be throttled. The opening and closing times must be adjusted accordingly. There are two options for the short housing without holding force and the extended housing with holding force, enhanced holding force / double holding force: The design of the oval piston increases the holding force by 30% Double holding force type stroke is halved, holding force doubled. Weight reduction: Using lighter and higher performance materials. 4 sensor slots: After installation of the proximity switch, it will no longer protrude from the bottom of the housing. AEVULQ-40-10-P-A, vacuum suction cup ESV-20-SSDSBC-63-80-D3-PPSA-N3, DFM-25-30-P-A-KF hydraulic buffer YSRW-20-34, LFP-D-MIDI-40M pressure reducing valve LR-1/8-G, D series pressure reducing valve LR-3/4-D-7-DI-MAXIGRLA-3/8-QS-10-RS-D, vacuum suction cup ESS-200-SSDSBC-40-80-D3-PPSA-N3, double acting multi-mounting DMM-20-50-P-ADGC-K-32-900-PPV-A-GK, LFR-1/4-D-MIDI pressure reducing valve LR-M3-G1/2-10GI, pressure reducing valve LR-M2-N1/4-16GVN-14-H-T4-PI4-VI5-RO2, VPPL-3Q-3-Z-0L20H-V1-V-S1-4DSBC-50-200-PPSA-N3, double acting anti-torsion cylinder DZH-63-80-PPV-ADFM-63-25-P-A-KF, EMME-AS-100-M-HS-AMX pressure reducing plate LR-ZP-B-D-1-CT, pressure reducing valve LR-M2-G1/2-10D series lockable pressure reducing valve LRS-1/8-D-O-I-MINI, AEVULQZ-16-15-P-A, vacuum suction cup ESV-100-SS, DSM-63-270-P-FW-A-B, DFM-25-40-P-A-GF, plastic air tube PUN-E-8X1-SWLFR-1/2-D-5M-MIDI-A, D series

Double acting cylinder CMK2-00-25-220 belongs to the Air Pressure Cylinders series under CKD company, model number CMK2-00-25-220. To purchase or inquire about Double acting cylinder CMK2-00-25-220, you can directly contact 158 0047 0089 (Mr. He).

FAQ

What is the basic function of CKD pneumatic components?

CKD pneumatic components use compressed air as a power source to transmit and convert forces. They can be used to control machine movements, transmit force, or achieve automation. Common pneumatic components include cylinders, pneumatic valves, and pneumatic motors.
What are the main types of CKD pneumatic components?

1. Cylinders: Used to convert the energy of compressed air into mechanical energy to produce linear motion.

2. Pneumatic valves: Used to control the direction, speed, and pressure of airflow, regulating the operation of pneumatic systems.

3. Pneumatic motors: Devices that convert compressed air into rotary motion.

4. Air tubes and connectors: Used to connect various components in pneumatic systems and transmit air.
Do CKD pneumatic components require regular maintenance? If yes, what are the key points?

Yes, CKD pneumatic components require regular maintenance to ensure normal operation and extend service life. Key maintenance points include:

- Regularly check and replace seals and gaskets to prevent air leakage.

- Inspect and clean filters to ensure clean air quality.

- Lubricate moving parts to reduce wear and improve efficiency.

- Check air tubes and connectors to ensure secure and undamaged connections.
How to choose the right CKD pneumatic components?

When selecting the appropriate CKD pneumatic components, consider the following factors:

Application requirements: Understand the specific working environment and tasks, such as load, speed, and stroke.

Air source conditions: Ensure that the pressure and flow of the air source meet the component’s requirements.

Installation space: Confirm available space and choose components of suitable size.

Environmental factors: Consider the temperature, humidity, and potential corrosiveness of the working environment to select suitable materials and designs.
What are common faults in CKD pneumatic component systems and how to troubleshoot?

Common pneumatic system faults include:

Air leakage: Causes efficiency decline; check seals, connections, and tubes, find leak points, and repair or replace.

Stuck cylinder piston: Possibly caused by dirt or insufficient lubrication; clean the piston and add lubricant.

Valve failure: Check electrical control signals, ensure smooth airflow, and verify if the valve itself is damaged.

Insufficient pressure: Inspect air source pressure, filters, and piping to ensure no blockage or leakage.