CMK2-CC-40-25 plastic air tube, standard outer diameter Technical parameters. Precautions. An air tube with a diameter that is too large or too small, as well as a complete radius that is too small, will cause a loss of flow. Therefore, when choosing an air tube, one rule must be remembered: length as needed, do not increase the length unnecessarily. Thus, ensure that in actual work, the air tube is laid loosely, without stretching tension. Tools for tying up the air tube or preventing the air tube from bending/twisting can be ordered as accessories: air tube tie PB, air tube spiral tie PKB air tube support NPAW air tube support PKS? Multi-way air tube support KK, other accessories include air tube connection tools: tube cutting pliers ZRS tube cutting pliers PAN-V0S, for flame-retardant plastic air tube PAN-V0, tube insertion pliers ZMS/tube extraction pliers ZDS for insertion and extraction of plastic air tubes and hook fittings, the air tube is bent in the direction of its inherent curvature, until the outer diameter of the air tube produces a 5% flattening. Rd can then be calculated. Before the bend reaches Rd, there will be no loss of flow. The flattened cross-section caused by the bent air tube d= outer diameter of the air tube without deformation d1= outer diameter of the air tube with deformation, minimum bending radius Rmin, bend the air tube installed on a movable plate until it deforms and twists. The measured value is the minimum bending radius Rmin. Rmin causes a significant reduction in flow. Note that the product options in parentheses can only be ordered through the modular product system. 192388
Double acting cylinder CMK2-CC-40-25 belongs to the Air Pressure Cylinders series under CKD company, model number CMK2-CC-40-25. To purchase or inquire about Double acting cylinder CMK2-CC-40-25, you can directly contact 158 0047 0089 (Mr. He).
1. Cylinders: Used to convert the energy of compressed air into mechanical energy to produce linear motion.
2. Pneumatic valves: Used to control the direction, speed, and pressure of airflow, regulating the operation of pneumatic systems.
3. Pneumatic motors: Devices that convert compressed air into rotary motion.
4. Air tubes and connectors: Used to connect various components in pneumatic systems and transmit air.
Yes, CKD pneumatic components require regular maintenance to ensure normal operation and extend service life. Key maintenance points include:
- Regularly check and replace seals and gaskets to prevent air leakage.
- Inspect and clean filters to ensure clean air quality.
- Lubricate moving parts to reduce wear and improve efficiency.
- Check air tubes and connectors to ensure secure and undamaged connections.
When selecting the appropriate CKD pneumatic components, consider the following factors:
Application requirements: Understand the specific working environment and tasks, such as load, speed, and stroke.
Air source conditions: Ensure that the pressure and flow of the air source meet the component’s requirements.
Installation space: Confirm available space and choose components of suitable size.
Environmental factors: Consider the temperature, humidity, and potential corrosiveness of the working environment to select suitable materials and designs.
Common pneumatic system faults include:
Air leakage: Causes efficiency decline; check seals, connections, and tubes, find leak points, and repair or replace.
Stuck cylinder piston: Possibly caused by dirt or insufficient lubrication; clean the piston and add lubricant.
Valve failure: Check electrical control signals, ensure smooth airflow, and verify if the valve itself is damaged.
Insufficient pressure: Inspect air source pressure, filters, and piping to ensure no blockage or leakage.
