Shinano Kenshi (CKD) double acting cylinder CMK2-CC-40-550

The CMK2-CC-40-550 rodless pneumatic cylinder works as follows: Drive shaft 1 rotates the cylinder body 2, which has an odd number of piston holes evenly distributed on it. Piston hole 6 contains piston 5, and the head of piston 5 is pressed against the swash plate 3 by the slipper 4. The working pressure difference: the minimum working pressure difference above 0.04Mpa can be selected for indirect pilot type; the minimum working pressure difference close to or less than zero must choose direct acting or step direct type. In addition, the throttle and action parts of the proportional valve should尽量 avoid setting very small diameter orifices to prevent blockage. If necessary, add a filter, regular maintenance and set up bypass pipelines. This type of valve has a good development and application prospect. During installation or maintenance, due to the reasons of maintenance technology and maintenance technology, the expansion clearance of the inner cylinder, cylinder baffle, baffle套 and steam seal套 is not suitable, or the expansion clearance of the hanger ear pressure plate is not suitable, resulting in huge expansion force after operation, causing the cylinder deformationCLR-12-20-R-P-A, double acting torsion cylinderDZH-16-125-PPV-APRAEZ.DR.REG.V.MS6-LRP-3/8-D2-A8, MPYE-5-1/8-LF-010-BDSBC-80-200-PPSA-N3, M series pressure reducing valveLRB-M2-G1/2-10K polyurethane air tubePUN-3X0,5-GE, vacuum suction cupESV-100-EF pressure reducing valveLR-M3-G1/2-10GI, LFR-1/4-D-MIDIGRLA-1/2-B, pressure reducing valveLR-M1-G1/4-07GKDSBC-100-160-PPVA-N3,, vacuum suction cupESS-10-SF plastic air tubePUN-H-10X1,5-BL, DGC-K-63-400-PPV-A-GK, pressure reducing valveLR-M3-G1/2-10K, D series lockable pressure reducing valveLRS-1/4-D-7-O-I-MINI vacuum suction cupESS-80-SU, corrugated suction cupVASB-125-3/8-SIDFM-32-100-P-A-GF, DFM-12-100-P-A-GF pressure reducing valveLR-M3-N3/4-16GK, precision lockable pressure reducing valveLRPS-1/4-10L type fixed differential pressure reducing valveLRLL-M5-QS-6, pressure reducing valveLRMA-1/8-QS-4DSBC-40-70-D3-PPVA-N3,, vacuum suction cupESV-100-EDGC-K-80-1200-PPV-A-GK, DFM-80-25-P-A-KF pressure reducing valveLR-M3-G3/4-10GK, pressure reducing valveLR-M3-G3/8-16IKGRLA-1/8-QS-8-D,, AEVULQ-16-10-P-A-S2,DSBC-80-100-PPSA-N3, DSBC-32-125-PPVA-N3,DGC-32-1650-G-PPV-A, DGC-K-25-1600-PPV-A-GK pressure regulating valveLRBS-3/

Double acting cylinder CMK2-CC-40-550 belongs to the Air Pressure Cylinders series under CKD company, model number CMK2-CC-40-550. To purchase or inquire about Double acting cylinder CMK2-CC-40-550, you can directly contact 158 0047 0089 (Mr. He).

FAQ

What is the basic function of CKD pneumatic components?

CKD pneumatic components use compressed air as a power source to transmit and convert forces. They can be used to control machine movements, transmit force, or achieve automation. Common pneumatic components include cylinders, pneumatic valves, and pneumatic motors.
What are the main types of CKD pneumatic components?

1. Cylinders: Used to convert the energy of compressed air into mechanical energy to produce linear motion.

2. Pneumatic valves: Used to control the direction, speed, and pressure of airflow, regulating the operation of pneumatic systems.

3. Pneumatic motors: Devices that convert compressed air into rotary motion.

4. Air tubes and connectors: Used to connect various components in pneumatic systems and transmit air.
Do CKD pneumatic components require regular maintenance? If yes, what are the key points?

Yes, CKD pneumatic components require regular maintenance to ensure normal operation and extend service life. Key maintenance points include:

- Regularly check and replace seals and gaskets to prevent air leakage.

- Inspect and clean filters to ensure clean air quality.

- Lubricate moving parts to reduce wear and improve efficiency.

- Check air tubes and connectors to ensure secure and undamaged connections.
How to choose the right CKD pneumatic components?

When selecting the appropriate CKD pneumatic components, consider the following factors:

Application requirements: Understand the specific working environment and tasks, such as load, speed, and stroke.

Air source conditions: Ensure that the pressure and flow of the air source meet the component’s requirements.

Installation space: Confirm available space and choose components of suitable size.

Environmental factors: Consider the temperature, humidity, and potential corrosiveness of the working environment to select suitable materials and designs.
What are common faults in CKD pneumatic component systems and how to troubleshoot?

Common pneumatic system faults include:

Air leakage: Causes efficiency decline; check seals, connections, and tubes, find leak points, and repair or replace.

Stuck cylinder piston: Possibly caused by dirt or insufficient lubrication; clean the piston and add lubricant.

Valve failure: Check electrical control signals, ensure smooth airflow, and verify if the valve itself is damaged.

Insufficient pressure: Inspect air source pressure, filters, and piping to ensure no blockage or leakage.