Shacai (CKD) Double Acting Cylinder CMK2-LS-20-50-T2V-D

How to repair the CMK2-LS-20-50-T2V-D technical performance pneumatic gripper when problems arise? The leakage rate standard for pneumatic components is not high, and the sleeve valve can fully handle such conditions. At the same time, re-establish the pressure tapping point. After replacing the sleeve regulating valve, when debugging the system, reset the PID parameters, reduce the proportional band, increase the integral time, that is, slightly adjust the system response time, and the fluctuation of the steam pressure should be adjusted to meet the usage requirements. After such adjustments, the problem is basically resolved. The influence of abrasives; Normally closed type, when energized, the electromagnet coil generates sufficient electromagnetic force to lift the moving parts (consisting of the core, valve rod, upper and lower diaphragms/seals) from the valve seat, opening the valve; when de-energized, the spring force presses the moving parts against the valve seat, closing the valve. The reasons include the coil getting damp, causing poor insulation and magnetic leakage, resulting in excessive current in the coil and burning it out, therefore, preventing rainwater from entering the solenoid valve is necessary. In addition, if the spring is too hard, the reaction force is too large, or the number of coil turns is too few, the suction is not enough, which can also cause the coil to burn out. In an emergency, the manual button on the coil can be switched from the normal

Double-acting cylinder CMK2-LS-20-50-T2V-D belongs to the Air Pressure Cylinders series under CKD company, model number CMK2-LS-20-50-T2V-D. To purchase or inquire about Double-acting cylinder CMK2-LS-20-50-T2V-D, you can directly contact 158 0047 0089 (Mr. He).

FAQ

What is the basic function of CKD pneumatic components?

CKD pneumatic components use compressed air as a power source to transmit and convert forces. They can be used to control machine movements, transmit force, or achieve automation. Common pneumatic components include cylinders, pneumatic valves, and pneumatic motors.
What are the main types of CKD pneumatic components?

1. Cylinders: Used to convert the energy of compressed air into mechanical energy to produce linear motion.

2. Pneumatic valves: Used to control the direction, speed, and pressure of airflow, regulating the operation of pneumatic systems.

3. Pneumatic motors: Devices that convert compressed air into rotary motion.

4. Air tubes and connectors: Used to connect various components in pneumatic systems and transmit air.
Do CKD pneumatic components require regular maintenance? If yes, what are the key points?

Yes, CKD pneumatic components require regular maintenance to ensure normal operation and extend service life. Key maintenance points include:

- Regularly check and replace seals and gaskets to prevent air leakage.

- Inspect and clean filters to ensure clean air quality.

- Lubricate moving parts to reduce wear and improve efficiency.

- Check air tubes and connectors to ensure secure and undamaged connections.
How to choose the right CKD pneumatic components?

When selecting the appropriate CKD pneumatic components, consider the following factors:

Application requirements: Understand the specific working environment and tasks, such as load, speed, and stroke.

Air source conditions: Ensure that the pressure and flow of the air source meet the component’s requirements.

Installation space: Confirm available space and choose components of suitable size.

Environmental factors: Consider the temperature, humidity, and potential corrosiveness of the working environment to select suitable materials and designs.
What are common faults in CKD pneumatic component systems and how to troubleshoot?

Common pneumatic system faults include:

Air leakage: Causes efficiency decline; check seals, connections, and tubes, find leak points, and repair or replace.

Stuck cylinder piston: Possibly caused by dirt or insufficient lubrication; clean the piston and add lubricant.

Valve failure: Check electrical control signals, ensure smooth airflow, and verify if the valve itself is damaged.

Insufficient pressure: Inspect air source pressure, filters, and piping to ensure no blockage or leakage.