When selecting the CMK2-M-00-20-100/Z solenoid valve, factors to consider for the control of solid materials are often used as a discharge valve at the bottom of tanks, such as cement and stone powder tanks, for discharging and rapid cutoff. Since dusty materials usually contain particles of varying sizes, wear on the valve sealing surface is inevitable. Improper selection can significantly reduce the service life of the valve or quickly cause internal leakage of the solenoid valve, affecting its continued use. There is a case study: a batching weighing system was fully automatically controlled by PLC, and the discharge valve for the batching car was a pneumatic triple eccentric butterfly valve, with a very fine stone powder as the medium. After using it for a while, the customer reported internal leakage of the valve, causing the stone powder to frequently leak in heaps onto the workbench. Pressure reducing valve LR-M1-G1/8-04, polyurethane hose PUN-8X1,25-SI vacuum suction cup VAS-10-M5-PUR, pressure regulating valve LR-ZP-A/B-D-3DFM-25-40-P-A-GF, DSM-63-270-P-FW-A-B, GRLA-M5-QS-4-LF-C, EMME-AS-60-S-LS-ASB pressure reducing valve LR-1-D-7-O-MAXI-NPT, pressure reducing valve LR-M2-N3/8-10IDFM-100-125-P-A-KF, pressure reducing valve LR-M3-N3/8-04GK pressure reducing valve LR-M2-N1/2-04GI, vacuum suction cup ESV-100-SNDFM-100-80-P-A-GF, LFR-3/8-D-MINI-MPA116B-591BA M0D:0389, 6632A-000-PM-113JD116B-610JM, 52A-11-A0A-DM-DDAA-1BA116B-611BAAA, 225B-661BAAA116B-611JB, MV-B2A-AABA-DM-DDAJ-1JJ M0D5889116B-871JM, 250B-501JJ M0D8486117B-111BA, 130B-501JJ M0D8486117B-121BA, 6211C-000-PM-501DA117B-121JC, BV310A-LD1-00-BHBA-BTA130B-111JJ, 93A-000-EJG130B-111JJ M0D:0458, PME-DABE130B-121JB, 56C-63-611JB161B-501JB, 52A-31-D0A-DM-DJAA-1BA161B-611JD, DMB-DFFJ-1JM-1166B-611JM, 36A-B00-JDA0-1KA166B-612JB, 111B-501BAAA180001-112-0112, 16375225B-114CA, 16774225
Double acting cylinder CMK2-M-00-20-100/Z belongs to the Air Pressure Cylinders series under CKD company, model number CMK2-M-00-20-100/Z. To purchase or inquire about Double acting cylinder CMK2-M-00-20-100/Z, you can directly contact 158 0047 0089 (Mr. He).
1. Cylinders: Used to convert the energy of compressed air into mechanical energy to produce linear motion.
2. Pneumatic valves: Used to control the direction, speed, and pressure of airflow, regulating the operation of pneumatic systems.
3. Pneumatic motors: Devices that convert compressed air into rotary motion.
4. Air tubes and connectors: Used to connect various components in pneumatic systems and transmit air.
Yes, CKD pneumatic components require regular maintenance to ensure normal operation and extend service life. Key maintenance points include:
- Regularly check and replace seals and gaskets to prevent air leakage.
- Inspect and clean filters to ensure clean air quality.
- Lubricate moving parts to reduce wear and improve efficiency.
- Check air tubes and connectors to ensure secure and undamaged connections.
When selecting the appropriate CKD pneumatic components, consider the following factors:
Application requirements: Understand the specific working environment and tasks, such as load, speed, and stroke.
Air source conditions: Ensure that the pressure and flow of the air source meet the component’s requirements.
Installation space: Confirm available space and choose components of suitable size.
Environmental factors: Consider the temperature, humidity, and potential corrosiveness of the working environment to select suitable materials and designs.
Common pneumatic system faults include:
Air leakage: Causes efficiency decline; check seals, connections, and tubes, find leak points, and repair or replace.
Stuck cylinder piston: Possibly caused by dirt or insufficient lubrication; clean the piston and add lubricant.
Valve failure: Check electrical control signals, ensure smooth airflow, and verify if the valve itself is damaged.
Insufficient pressure: Inspect air source pressure, filters, and piping to ensure no blockage or leakage.
