CKD Chikai Double Acting Cylinder MDC2-10-10

The MDC2-10-10 electric cylinder, due to its large number of electrical components, has high environmental requirements and poor adaptability. The cylinder is relatively effortless to open and close compared to a gate valve, as the direction of the gate movement is always perpendicular to the direction of media flow whether it is opening or closing. If the deformation of the upper cylinder joint surface is within 0.05mm, use the upper cylinder joint surface as the reference plane, apply red lead to the lower cylinder joint surface or press blue paper, and grind the lower cylinder according to the marks. If the deformation of the upper cylinder joint surface is large, apply red lead to the upper cylinder, use a large flat ruler to grind out the marks, and level the upper cylinder. Alternatively, use mechanical processing methods to level the upper cylinder joint surface, and then grind the lower cylinder joint surface based on the upper cylinder. There are generally two methods for grinding the cylinder joint surface: when the valve is in use, it should not be closed too much, as soon as the diaphragm presses against the valve body weir surface is enough. The valve opening speed should not be too fast either, as too fast a speed will put all the load force on the diaphragm screw, which can damage the diaphragm. 45A-L00-DAAA-1BA, 413A-00A-DM-DJND-1BA M0D:195145A-L00-DDAJ-2KJ-9, 45A-AA1-DAGA-1BA45A-L00-DDAJ-2TE9 M0D: 0841, 52A-13-00A-DM-DDAJ-1KJ45A-SC1-DABA-1BA, 411A-B0A-DM-DDPJ-1JB M0D:416E45A-SC1-DDAJ-1KD, 45A-SC1-DDFA-1BA M0D:CLSF45A-SE2-DABA-1BA, 33A-L0B-RDFA-0TA45A-SE2-DDAA-1BA, 186B-611BA M0D:884546A-AA1-JDAA-1BA, 55B-12-RA M0D:EH5546A-SC1-JDAA-1BA, 55B-12-PI-111JJ M0D:M87948A-AMA-000-GDK0-1KJ, BV210A-CB0-00-BEKA-CTA52A-11-D0A-DM-DDFJ-1KJ M0D:CLSF，45A-AB1-DDAB-1BA M0D:R00555B-11-PI-501JC，821C-PP-761BA-152 M0D:627155B-12-PI-121CA，35A-ACA-DFAJ-2KJ55B-12-PI-291JA，6532B-371-PM-611BA55B-14-PE-591JB，MV-A1C-A312-PM-611BA55B-14-PI-611JB，917960-0156C-17-611JA，36A-ACA-JDAA-1GD56C-53-RA，53A-1BB-DM-DDDA-1BA56C-76-501BA，36A-B00-JDA0-1KJ M0D:88

Double acting cylinder MDC2-10-10 belongs to the Air Pressure Cylinders series under CKD company, model number MDC2-10-10. To purchase or inquire about Double acting cylinder MDC2-10-10, you can directly contact 158 0047 0089 (Mr. He).

FAQ

What is the basic function of CKD pneumatic components?

CKD pneumatic components use compressed air as a power source to transmit and convert forces. They can be used to control machine movements, transmit force, or achieve automation. Common pneumatic components include cylinders, pneumatic valves, and pneumatic motors.
What are the main types of CKD pneumatic components?

1. Cylinders: Used to convert the energy of compressed air into mechanical energy to produce linear motion.

2. Pneumatic valves: Used to control the direction, speed, and pressure of airflow, regulating the operation of pneumatic systems.

3. Pneumatic motors: Devices that convert compressed air into rotary motion.

4. Air tubes and connectors: Used to connect various components in pneumatic systems and transmit air.
Do CKD pneumatic components require regular maintenance? If yes, what are the key points?

Yes, CKD pneumatic components require regular maintenance to ensure normal operation and extend service life. Key maintenance points include:

- Regularly check and replace seals and gaskets to prevent air leakage.

- Inspect and clean filters to ensure clean air quality.

- Lubricate moving parts to reduce wear and improve efficiency.

- Check air tubes and connectors to ensure secure and undamaged connections.
How to choose the right CKD pneumatic components?

When selecting the appropriate CKD pneumatic components, consider the following factors:

Application requirements: Understand the specific working environment and tasks, such as load, speed, and stroke.

Air source conditions: Ensure that the pressure and flow of the air source meet the component’s requirements.

Installation space: Confirm available space and choose components of suitable size.

Environmental factors: Consider the temperature, humidity, and potential corrosiveness of the working environment to select suitable materials and designs.
What are common faults in CKD pneumatic component systems and how to troubleshoot?

Common pneumatic system faults include:

Air leakage: Causes efficiency decline; check seals, connections, and tubes, find leak points, and repair or replace.

Stuck cylinder piston: Possibly caused by dirt or insufficient lubrication; clean the piston and add lubricant.

Valve failure: Check electrical control signals, ensure smooth airflow, and verify if the valve itself is damaged.

Insufficient pressure: Inspect air source pressure, filters, and piping to ensure no blockage or leakage.