When disassembling and assembling the SRL2-63K-1000 valve body, the bolts and nuts on the flange should be fixed first, then all nuts should be tightened slightly, and finally fixed firmly. If some nuts are forcibly fixed first and then other nuts are fixed, the flange faces will be unevenly stressed, causing damage or rupture to the gasket, resulting in medium leakage at the valve flange joint. If the valve is to be cleaned, the solvent used must not conflict with or corrode the parts to be cleaned. If it is a gas-specific ball valve, gasoline can be used for cleaning. Other parts can usually be cleaned with tap water. When cleaning, make sure to thoroughly clean off any remaining dust, oil, and other adherents. If water alone cannot clean it thoroughly, you can use alcohol or other cleaning agents specifically, without damaging the valve body and parts. After cleaning, wait for the cleaning agent to completely evaporate before assembling. 55B-13-RA, 45A-BC1-DDAA-1BA56C-16-121JB, 45A-L00-DDAJ-2TE M0D:0841PPC5C-AAA-AGAA-BBB-F0 M0D:EA54, 45A-SC1-DDAA-1BA obsolete 111B-421BAAA M0d: 4311 for HAAS only, 52A-11-D0A-DM-DDAA-1BA57D-36-121BA M0D:M705, 55B-14-PE-501BA55B-12-PI-294JA, 55B-14-PI-501BA130B-501JA, 56C-58-RA92B-CBA-000-DM-DDAJ-1JB, 811C-PM-501BA-125 M0D:036992B-ABA-000-DM-DDAJ-1JB, 916B-PM-611JB47A-L10-HDAA-1KA, M-35001-01P166B-611JM M0D:M681, M-45001-01P250B-111CA, 36A-ACA-JDAA-1BA117B-611JB, 111B-121BADMB-DDAP-1DM1, 34C-ABA-GDFA-1GA52A-11-D0A-GM-GEMA-1KA M0D:1266, 111B-121JA M0D:CLSF34C-N00-GFMA-0GA M0D:S009, 117B-501BA34B-AAA-GDFE-1KA, 117B-611BAE-P3015-011, 411A-B0A-DM-DDAJ-1JM M0D:4357421A-A0A-DM-DDDM-1BK M0D:446D, 45A-AA1-DDFA-1BA M0D:CLSF414A-B0A-DM-DDDM-1BK, 45A-BC1-DABA-1BA44B-ABA-GFL0-1PA M0D:7190, 56C-5
Double acting cylinder SRL2-63K-1000 belongs to the Air Pressure Cylinders series under CKD company, model number SRL2-63K-1000. To purchase or inquire about Double acting cylinder SRL2-63K-1000, you can directly contact 158 0047 0089 (Mr. He).
1. Cylinders: Used to convert the energy of compressed air into mechanical energy to produce linear motion.
2. Pneumatic valves: Used to control the direction, speed, and pressure of airflow, regulating the operation of pneumatic systems.
3. Pneumatic motors: Devices that convert compressed air into rotary motion.
4. Air tubes and connectors: Used to connect various components in pneumatic systems and transmit air.
Yes, CKD pneumatic components require regular maintenance to ensure normal operation and extend service life. Key maintenance points include:
- Regularly check and replace seals and gaskets to prevent air leakage.
- Inspect and clean filters to ensure clean air quality.
- Lubricate moving parts to reduce wear and improve efficiency.
- Check air tubes and connectors to ensure secure and undamaged connections.
When selecting the appropriate CKD pneumatic components, consider the following factors:
Application requirements: Understand the specific working environment and tasks, such as load, speed, and stroke.
Air source conditions: Ensure that the pressure and flow of the air source meet the component’s requirements.
Installation space: Confirm available space and choose components of suitable size.
Environmental factors: Consider the temperature, humidity, and potential corrosiveness of the working environment to select suitable materials and designs.
Common pneumatic system faults include:
Air leakage: Causes efficiency decline; check seals, connections, and tubes, find leak points, and repair or replace.
Stuck cylinder piston: Possibly caused by dirt or insufficient lubrication; clean the piston and add lubricant.
Valve failure: Check electrical control signals, ensure smooth airflow, and verify if the valve itself is damaged.
Insufficient pressure: Inspect air source pressure, filters, and piping to ensure no blockage or leakage.
