The sealing method, the connection between the shaft and the butterfly plate of the STR2-B-16-20 solenoid valve is unique and has been granted a utility model. It is widely used in the transport of medium pipelines and plays a regulating role in solenoid valves. It is also suitable for various corrosive liquids, gases, and solid powders. In the field use of the booster, many diaphragm cut-off valves are often not caused by the quality of the regulating valve itself, but by improper installation and use of the regulating valve, such as improper installation environment, installation position and direction, or unclean pipeline, etc. Therefore, how to control the hydraulic cylinder or pneumatic cylinder system with the basic valve of the electric regulating valve in installation and use is shown in the figure. The working hole of the single electric control two-position four-way (five-way) solenoid valve, one of which is a normally open working hole, when the solenoid valve is in the power-off state, the medium in the inlet (liquid) hole P directly enters the working hole B, causing the hydraulic cylinder or pneumatic piston to push towards the C end. 180001-115-0149, 67A-C3-BRA-RA M0D:7797113B-501BA, 6312D-381-PM-611BA130B-111JB, 411A-D0A-DM-DDAJ-1KJ M0D:857482A-BF-FAA-TU-DAA3-1DA M0D:0532, 411A-D0A-DM-DDAA-1BA M0D:8574PPC5C-ABA-AGAB-DAA-HB, 56C-15-611BA411A-D0A-DM-DDAJ-1KJ, 67A-A3-ARA-RA M0D:7797PME-111BA, 821C-PM-6F1JA-155 M0D:XNGE130B-501JJ, 35A-ACA-DFEA-1BA M0D:8766811C-PM-111BA-155, 45A-AC1-DFFA-1BA250B-111JA M0D:M560, 67A-C3-ARA-RA M0D:779737A-AD0-HDA0-1KA, 45A-BC1-DABA-1BA M0D:CLSF34C-L00-GDGA-1BA, 35A-ACA-DDFA-1BA M0D:6407811C-PM-871BA-152, 34B-AAA-GDFE-1KT82A-BC-CAA-TM-DDAP-1DA, 111B-611JB82A-AC-BBA-TM-DDAP-1DA, 116B-501JM82A-AC-BKA-TM-DDAP-1DA, 225B-611BA82A-FC-BKA-TM-DDAP-1DA, 35A-ACA-DAAJ-1KA461A-D0A-DM-DJBJ-1JB, 411A-D0A-DM-DDAA-1BA35A-AAA-DFBA-1BA M0D:1172, 411A-D0A-DM-DDAJ-1JB57D-8
Double acting cylinder STR2-B-16-20 belongs to the Air Pressure Cylinders series under CKD company, model number STR2-B-16-20. To purchase or inquire about Double acting cylinder STR2-B-16-20, you can directly contact 158 0047 0089 (Mr. He).
1. Cylinders: Used to convert the energy of compressed air into mechanical energy to produce linear motion.
2. Pneumatic valves: Used to control the direction, speed, and pressure of airflow, regulating the operation of pneumatic systems.
3. Pneumatic motors: Devices that convert compressed air into rotary motion.
4. Air tubes and connectors: Used to connect various components in pneumatic systems and transmit air.
Yes, CKD pneumatic components require regular maintenance to ensure normal operation and extend service life. Key maintenance points include:
- Regularly check and replace seals and gaskets to prevent air leakage.
- Inspect and clean filters to ensure clean air quality.
- Lubricate moving parts to reduce wear and improve efficiency.
- Check air tubes and connectors to ensure secure and undamaged connections.
When selecting the appropriate CKD pneumatic components, consider the following factors:
Application requirements: Understand the specific working environment and tasks, such as load, speed, and stroke.
Air source conditions: Ensure that the pressure and flow of the air source meet the component’s requirements.
Installation space: Confirm available space and choose components of suitable size.
Environmental factors: Consider the temperature, humidity, and potential corrosiveness of the working environment to select suitable materials and designs.
Common pneumatic system faults include:
Air leakage: Causes efficiency decline; check seals, connections, and tubes, find leak points, and repair or replace.
Stuck cylinder piston: Possibly caused by dirt or insufficient lubrication; clean the piston and add lubricant.
Valve failure: Check electrical control signals, ensure smooth airflow, and verify if the valve itself is damaged.
Insufficient pressure: Inspect air source pressure, filters, and piping to ensure no blockage or leakage.
