STR2-M-10-25In order to ensure that the shut-off valve can continue the production process in case of failure or maintenance, a bypass pipeline should be added to the regulating valve. At the same time, special attention should be paid to whether the installation position of the regulating valve meets the requirements of the process. During use, the gas pressure is reduced to the required range for the experiment by an electric cylinder, and then fine-tuned through other control valves to allow the gas to enter the system. The most commonly used pressure reducing valve is the oxygen pressure reducing valve, commonly known as the oxygen meter. 1. The working principle of the oxygen pressure reducing valve The appearance and working principle of the oxygen pressure reducing valve. The high-pressure chamber of the oxygen pressure reducing valve is connected to the cylinder, and the low-pressure chamber is the gas outlet, which leads to the system. The high-pressure gauge indicates the pressure of the gas stored in the cylinder. The outlet pressure of the low-pressure gauge can be controlled by the adjusting screw.411A-F0A-DM-DFFA-2BA, 45A-SE2-DABA-1BA411A-F0A-DM-DFFJ-2KD, 45A-SE2-DDAA-1BA918B-RA, 56C-76-501BA93A-AJ0-E0J-DM-DFBJ-2KD, 6211C-251-PM-111DA55B-14-PI-874JB, 35A-ACA-DDAJ-1KA45A-AA1-DDAJ-0KJ, 6341D-351-PM-501DA58D-31-111CA, N-62015-0134C-ABA-GDFA-1KT, 6311D-351-PM-611DA45A-AA1-DEDJ-1KD, 411A-C0A-DM-DDAJ-1JM930426-A, 35A-ACA-DDAJ-1KD34B-ABA-GFEA-1BA, 411A-D0A-DM-DDAJ-1JM56C-58-RA M0D:7977, 56C-36-501BA56C-56-RA M0D:7977, 45A-BE1-DDDJ-1KD M0D111555B-14-PI-611JC, 52A-11-D0B-DM-DDAA-1BA55B-24-PI-611JC, 411A-D0A-DM-DDAJ-1KJ56C-16-611JC, 811C-PM-501JD-17257D-14-611JC, 33A-L0B-RDFA-0TA M0D:M956MV-B1A-AAAA-DM-DDAJ-1JA, 92B-AAB-FJA-DM-DDAP-2DM M0D:159AMV-A1C-A111-PM-501JA, 411A-D0A-DM-DDFJ-1KJ M0D:CLSFPPC5C-ABB-EGAA-DBA-EB, 6321D-313-PM-502DA180001-115-0036, 6521B-313-PM-502DA180001-115-0111, 6511B-31
Double acting cylinder STR2-M-10-25 belongs to the Air Pressure Cylinders series under CKD company, model number STR2-M-10-25. To purchase or inquire about Double acting cylinder STR2-M-10-25, you can directly contact 158 0047 0089 (Mr. He).
1. Cylinders: Used to convert the energy of compressed air into mechanical energy to produce linear motion.
2. Pneumatic valves: Used to control the direction, speed, and pressure of airflow, regulating the operation of pneumatic systems.
3. Pneumatic motors: Devices that convert compressed air into rotary motion.
4. Air tubes and connectors: Used to connect various components in pneumatic systems and transmit air.
Yes, CKD pneumatic components require regular maintenance to ensure normal operation and extend service life. Key maintenance points include:
- Regularly check and replace seals and gaskets to prevent air leakage.
- Inspect and clean filters to ensure clean air quality.
- Lubricate moving parts to reduce wear and improve efficiency.
- Check air tubes and connectors to ensure secure and undamaged connections.
When selecting the appropriate CKD pneumatic components, consider the following factors:
Application requirements: Understand the specific working environment and tasks, such as load, speed, and stroke.
Air source conditions: Ensure that the pressure and flow of the air source meet the component’s requirements.
Installation space: Confirm available space and choose components of suitable size.
Environmental factors: Consider the temperature, humidity, and potential corrosiveness of the working environment to select suitable materials and designs.
Common pneumatic system faults include:
Air leakage: Causes efficiency decline; check seals, connections, and tubes, find leak points, and repair or replace.
Stuck cylinder piston: Possibly caused by dirt or insufficient lubrication; clean the piston and add lubricant.
Valve failure: Check electrical control signals, ensure smooth airflow, and verify if the valve itself is damaged.
Insufficient pressure: Inspect air source pressure, filters, and piping to ensure no blockage or leakage.
