CKD SMC Directional Cylinder DFM-63-160-P-A-KF

The festo directional cylinder DFM-63-160-P-A-KF has relatively small input signals; it can accept a variety of input methods, such as manual, electric, hydraulic, pneumatic, mechanical cam, and electric proportional, etc.; in variable pump control situations, various pilot valves form a modular structure, making it convenient to choose from multiple functions; GEMÜ provides pilot valves for pneumatic heads and other process components. GEMÜ offers three different solutions to achieve additional functions in the smallest space: high cleanliness plays an important role in the maintenance and care of manufacturing tools and molds, which are commonly used in the production of rubber and plastic molded parts. Different processes can use different cleaning parts. GEMÜ's pilot valves have a wide range of applications in ultrasonic cleaning processes. It is a special version of the classic two-way two-port valve body. It represents an integrated sampling, steam, and condensate valve. The valve body is made of forged billets or solid steel materials. 3. Self-sealing valve cover The valve cover and the valve body adopt a self-sealing structural design, and within the allowable pressure range, the higher the fluid pressure, the tighter the seal. If there is light leakage when checking the piston ring of a German cylinder, we can first retract the piston below the cylinder, then push it up to the top of the cylinder in parallel, or we can place an incandescent lamp inside the cylinder that needs to be checked, and use a piece of cardboard slightly smaller in diameter than the cylinder to cover the ring to block the light. Overall, the light leakage of the gas ring's outer circle is subject to certain requirements, for example, the chrome-plated ring of the outer circle should not exceed 20, and the total length should not be higher than 35. 1. High filtration accuracy: the removal rate of suspended solids in water can reach over 95%, and it has a certain removal effect on large molecular organic matter, viruses, bacteria, colloids, iron, and other impurities. After good coagulation treatment, the treated water with an inlet of 10NTU can achieve an outlet of less than 1NTU; 1. It is necessary to use clean and dry compressed air. The air should not contain organic solvents, synthetic oils, salts, corrosive gases, etc., to prevent poor action of the cylinder and valve. Knowledge supplement: the quality of the cylindrical surface connection in the piston connection structure at both ends of the unidirectional flow control valve depends on the precision machining of the cylindrical convex surface. In addition, the force transmission of the entire structure is borne by the convex surface and the nut. This connection is usually loaded with a fixed device for tightening, commonly known as the relaxation measure. The main advantage of the conical connection structure is its emphasis on tightening. Generally, no positioning device is required, and the assembly is relatively simple in terms of the overall structure. However, the machining requirements are also increased. The machining of the conical surface is complex, and the shaft shoulder needs to be ground and fitted with the piston rod bearing surface during assembly. Moreover, the coaxiality tolerance of the piston rod and the piston must be guaranteed within a certain range (0.02-0.04mm, for reference only). The connection methods generally include threads, semi-rings, and taper pins, etc. Common anti-loosening methods include thread locking, special glue for piston rods, key slots, and screws, etc. The buffer is mainly suitable for operation in high temperature and high-pressure environments. The main models of the buffer can also be equipped with a radiator under special requirements. The spring buffer with a radiator is suitable for working temperatures 'C type' ≤425℃; 'I type'

Guided Cylinder DFM-63-160-P-A-KF belongs to the Air Pressure Cylinders series under CKD company, model number DFM-63-160-P-A-KF. To purchase or inquire about Guided Cylinder DFM-63-160-P-A-KF, you can directly contact 158 0047 0089 (Mr. He).

FAQ

What is the basic function of CKD pneumatic components?

CKD pneumatic components use compressed air as a power source to transmit and convert forces. They can be used to control machine movements, transmit force, or achieve automation. Common pneumatic components include cylinders, pneumatic valves, and pneumatic motors.
What are the main types of CKD pneumatic components?

1. Cylinders: Used to convert the energy of compressed air into mechanical energy to produce linear motion.

2. Pneumatic valves: Used to control the direction, speed, and pressure of airflow, regulating the operation of pneumatic systems.

3. Pneumatic motors: Devices that convert compressed air into rotary motion.

4. Air tubes and connectors: Used to connect various components in pneumatic systems and transmit air.
Do CKD pneumatic components require regular maintenance? If yes, what are the key points?

Yes, CKD pneumatic components require regular maintenance to ensure normal operation and extend service life. Key maintenance points include:

- Regularly check and replace seals and gaskets to prevent air leakage.

- Inspect and clean filters to ensure clean air quality.

- Lubricate moving parts to reduce wear and improve efficiency.

- Check air tubes and connectors to ensure secure and undamaged connections.
How to choose the right CKD pneumatic components?

When selecting the appropriate CKD pneumatic components, consider the following factors:

Application requirements: Understand the specific working environment and tasks, such as load, speed, and stroke.

Air source conditions: Ensure that the pressure and flow of the air source meet the component’s requirements.

Installation space: Confirm available space and choose components of suitable size.

Environmental factors: Consider the temperature, humidity, and potential corrosiveness of the working environment to select suitable materials and designs.
What are common faults in CKD pneumatic component systems and how to troubleshoot?

Common pneumatic system faults include:

Air leakage: Causes efficiency decline; check seals, connections, and tubes, find leak points, and repair or replace.

Stuck cylinder piston: Possibly caused by dirt or insufficient lubrication; clean the piston and add lubricant.

Valve failure: Check electrical control signals, ensure smooth airflow, and verify if the valve itself is damaged.

Insufficient pressure: Inspect air source pressure, filters, and piping to ensure no blockage or leakage.