SCA2-100K/Z cylinder CKD
Cylinder bore diameter (mm)
Theoretical calculation formula for cylinder force:
Seal ring
The end cap is equipped with air inlet and outlet ports, some also have a buffer mechanism inside the end cap. The rod side end cap is equipped with a seal ring and dust ring to prevent air leakage from the piston rod and prevent internal dust from mixing into the cylinder. The rod side end cap is equipped with a guide sleeve to improve the guiding accuracy of the cylinder, withstand a small amount of lateral load on the piston rod, reduce the bending amount of the piston rod when extended, and extend the service life of the cylinder. Guide sleeves are usually made of sintered oil-impregnated alloy, forward-tilting copper castings. The end cap used to be made of malleable cast iron, now to increase weight and prevent rust, aluminum alloy die casting is commonly used, and small cylinders use brass materials.
SCS-200K/Z
4KB419-00-B-AC220V
4KA121-M5
4KA121-M5
4KA121-M5
3AP2-8
CMK2-R-40-100-80-N13WF42.3-FL485969/Z
ADK11-20A-03MS-DC24V
4KA420-10-DC24V
4F510-15-AC220V/Z
AB41-03-8-02E-AC220V/Z
SW-T2YH
AP11-15A-03A-AC220V
RV3D150-90-45
HMF-25CS
SRL3-00-32B-900
RV3S3-90-90
A1019-1
4KA410-10-M1LS-DC24V
SCS2-LN-FA-160B-200-T0H5-D/Z
4GE320-08-BC-3
C1020-8-W-F1
G59D-8-P02
3PA110-M5-3
SCA2-40K/Z
SCA2-T-100K/Z
CMK2-M-FA-32-200/Z
CMK2-00-25-60/Z
4KA239-06-AC220V/Z
4F620-20-AC110V/Z
4G2-ADAPTOR-06/Z
GAB412-5-0-02E-DC24V/Z
SCA2-T-50/Z
G45D-6-P02/Z
B131-W/Z
Large Cylinder SCA2-100K/Z Cylinder belongs to the Air Pressure Cylinders series under CKD company, model number SCA2-100K/Z气缸CKD. To purchase or inquire about Large Cylinder SCA2-100K/Z Cylinder, you can directly contact 158 0047 0089 (Mr. He).
1. Cylinders: Used to convert the energy of compressed air into mechanical energy to produce linear motion.
2. Pneumatic valves: Used to control the direction, speed, and pressure of airflow, regulating the operation of pneumatic systems.
3. Pneumatic motors: Devices that convert compressed air into rotary motion.
4. Air tubes and connectors: Used to connect various components in pneumatic systems and transmit air.
Yes, CKD pneumatic components require regular maintenance to ensure normal operation and extend service life. Key maintenance points include:
- Regularly check and replace seals and gaskets to prevent air leakage.
- Inspect and clean filters to ensure clean air quality.
- Lubricate moving parts to reduce wear and improve efficiency.
- Check air tubes and connectors to ensure secure and undamaged connections.
When selecting the appropriate CKD pneumatic components, consider the following factors:
Application requirements: Understand the specific working environment and tasks, such as load, speed, and stroke.
Air source conditions: Ensure that the pressure and flow of the air source meet the component’s requirements.
Installation space: Confirm available space and choose components of suitable size.
Environmental factors: Consider the temperature, humidity, and potential corrosiveness of the working environment to select suitable materials and designs.
Common pneumatic system faults include:
Air leakage: Causes efficiency decline; check seals, connections, and tubes, find leak points, and repair or replace.
Stuck cylinder piston: Possibly caused by dirt or insufficient lubrication; clean the piston and add lubricant.
Valve failure: Check electrical control signals, ensure smooth airflow, and verify if the valve itself is damaged.
Insufficient pressure: Inspect air source pressure, filters, and piping to ensure no blockage or leakage.
