CKD Linear Slide Cylinder LCR-12-20-T2V-D

The linear slide cylinder, LCR-12-20-T2V-D, has developed towards high sealing, excellent adjustability, and long life, partially replacing gate valves. It can be classified into center-sealed, single-eccentric sealed, double-eccentric sealed, and triple-eccentric butterfly valves. The center-sealed type belongs to an earlier form of butterfly valve; compared to the center-sealed type, the single-eccentric seal has a more complex structure, slightly higher cost, better sealing performance, longer service life, and higher operating pressure. The double-eccentric seal and solenoid valve, compared to the single-eccentric type,依次 are more complex in structure, higher in manufacturing cost, better in sealing performance, longer in service life, and higher in operating pressure. The solenoid valve is characterized by its ability to withstand high temperatures, a higher applicable pressure range, a larger nominal diameter of the valve, a valve body made of carbon steel, and a valve plate seal ring that uses a metal ring instead of a rubber ring. Blockage and discharge: When the valve is in the closed state, the valve seats on both the upstream and downstream sides block the liquid, and the accumulated substances in the valve chamber can be discharged through the discharge device. Standard cylinders are applicable in various industries and are generally used in conjunction with lifting valves and solenoid pulse valves for dust removal equipment. The company customizes cylinders with different diameters and strokes, cylinder flanges, single and double ears for cylinders, as well as standard cylinder rods and extended cylinder rods, according to specific customer requirements and needs. Standard cylinders have air inlet and outlet ports on the end cover, and some also have a buffer mechanism inside the end cover. The rod side end cover is equipped with a sealing ring and a dust-proof ring to prevent air leakage from the piston rod and prevent external dust from entering the cylinder. The rod side end cover is equipped with a guide sleeve to improve the guiding accuracy of the cylinder, withstand a small amount of lateral load on the piston rod, reduce the bending amount of the piston rod when extended, and extend the service life of the cylinder. Guide sleeves are usually made of sintered oil-impregnated alloy, forward-tilting copper castings. The end cover used to be made of malleable cast iron, but now, to reduce weight and prevent rust, aluminum alloy die casting is commonly used, and small cylinders sometimes use brass materials. 1 Modular standard round cylinder DSNU, which conforms to the DIN/ISO 6432 standard, is more reliable in performance and can achieve more functions, far exceeding standard products. It has a variety of derived types and installation methods, and for any application, whether in terms of technology or economy, DSNU is the solution. · Diameter 8...63 mm · Stroke 10...500 mm · X stroke · Standard models are in stock 2. Clean type cylinder CRHD, a frictionless cylinder: the surface is very smooth, has strong corrosion resistance, and is easy to maintain. · Diameter 3 Cleanliness and chemical resistance may have any problems. The use method of the linear slide cylinder, LCR-12-20-T2V-D; valve rod seal failure causing external leakage is one of the problems affecting its service life and promotion, especially for conditions requiring zero leakage, which limits its application range. Main products include back light tube manufacturing systems, three-dimensional solder paste inspection machines, and automatic drug packaging systems used in automated mechanical goods, as well as refined system components, fluid control components, labor-saving components, pneumatic components in component products, including integrated process gas supply systems (IGS), vacuum proportional control systems, drug valves, direct-acting two and three-way valves, coolant valves, medical division

Linear Slide Cylinder LCR-12-20-T2V-D belongs to the Air Pressure Cylinders series under CKD company, model number LCR-12-20-T2V-D. To purchase or inquire about Linear Slide Cylinder LCR-12-20-T2V-D, you can directly contact 158 0047 0089 (Mr. He).

FAQ

What is the basic function of CKD pneumatic components?

CKD pneumatic components use compressed air as a power source to transmit and convert forces. They can be used to control machine movements, transmit force, or achieve automation. Common pneumatic components include cylinders, pneumatic valves, and pneumatic motors.
What are the main types of CKD pneumatic components?

1. Cylinders: Used to convert the energy of compressed air into mechanical energy to produce linear motion.

2. Pneumatic valves: Used to control the direction, speed, and pressure of airflow, regulating the operation of pneumatic systems.

3. Pneumatic motors: Devices that convert compressed air into rotary motion.

4. Air tubes and connectors: Used to connect various components in pneumatic systems and transmit air.
Do CKD pneumatic components require regular maintenance? If yes, what are the key points?

Yes, CKD pneumatic components require regular maintenance to ensure normal operation and extend service life. Key maintenance points include:

- Regularly check and replace seals and gaskets to prevent air leakage.

- Inspect and clean filters to ensure clean air quality.

- Lubricate moving parts to reduce wear and improve efficiency.

- Check air tubes and connectors to ensure secure and undamaged connections.
How to choose the right CKD pneumatic components?

When selecting the appropriate CKD pneumatic components, consider the following factors:

Application requirements: Understand the specific working environment and tasks, such as load, speed, and stroke.

Air source conditions: Ensure that the pressure and flow of the air source meet the component’s requirements.

Installation space: Confirm available space and choose components of suitable size.

Environmental factors: Consider the temperature, humidity, and potential corrosiveness of the working environment to select suitable materials and designs.
What are common faults in CKD pneumatic component systems and how to troubleshoot?

Common pneumatic system faults include:

Air leakage: Causes efficiency decline; check seals, connections, and tubes, find leak points, and repair or replace.

Stuck cylinder piston: Possibly caused by dirt or insufficient lubrication; clean the piston and add lubricant.

Valve failure: Check electrical control signals, ensure smooth airflow, and verify if the valve itself is damaged.

Insufficient pressure: Inspect air source pressure, filters, and piping to ensure no blockage or leakage.