The CAC4-A63B-100/Z vacuum generator is suitable for processes that require special technological requirements, such as leaks and special fluid media, and is relatively expensive. Electric valves are generally used for regulation, and there are also on-off types, such as: terminal of the fan coil unit. The vacuum generator can adjust the opening and closing times separately, not only meeting the control accuracy requirements but also preventing water hammer damage. b. Ordinary solenoid valves only have two positions, open and close. When high control accuracy and stable parameter requirements are needed, multi-position solenoid valves should be selected. The vacuum generator is driven by a coil and can only be opened or closed, with a short action time when switching. German standard cylinders are applicable in various industries and are usually配套 with lifting valves, electromagnetic pulse valves for dust removal equipment. The company customizes cylinders with different diameters and strokes, cylinder flanges, single and double ears for cylinders, as well as standard cylinder rods and extended cylinder rods according to specific customer requirements and needs. German standard cylinders have air inlet and outlet ports on the end cap, and some also have a buffer mechanism inside the end cap. The side cap of the rod is equipped with sealing rings and dust-proof rings to prevent air leakage from the piston rod and to prevent external dust from entering the cylinder. The side cap of the rod is equipped with a guide sleeve to improve the guiding accuracy of the cylinder, withstand a small amount of lateral load on the piston rod, reduce the bending amount when the piston rod extends, and extend the service life of the cylinder. Guide sleeves are usually made of sintered oil-impregnated alloys, forward-tilting copper castings. The end cap used to be made of malleable cast iron, but now to reduce weight and prevent rust, aluminum alloy die casting is commonly used, and small cylinders use brass materials. 1 Modular standard round cylinder DSNU, which conforms to the DIN/ISO 6432 standard, has more reliable performance and can achieve more functions, far exceeding standard products. It has a variety of derived types and installation methods, and for any application scenario, whether in terms of technology or economy, DSNU is the solution. · Diameter 8...63 mm · Stroke 10...500 mm · X stroke · Standard models are in stock 2. Clean type cylinder CRHD: a frictionless cylinder with a very smooth surface and strong corrosion resistance, easy to maintain. · Diameter 3 Cleanliness and chemical resistance may have any problems. In the field use of the booster, many film cutting valves are often not due to the quality of the regulating valve itself, but due to improper installation and use of the regulating valve, such as improper installation environment, installation position and direction, or unclean pipeline, etc. Therefore, when installing and using electric regulating valves, the following aspects should be paid attention to: Proximity switch P+F According to experience, the proximity switch should generally work within 30% to 70% of its range, but for some weighing instruments with large impact forces during use, such as dynamic track scales, dynamic vehicle scales, steel scales, etc., when selecting the proximity switch, the range is generally expanded to 20% to 30% within the range of the proximity switch to increase the weighing reserve of the proximity switch, to ensure the safety and life of the proximity switch. Servo motor allowable shaft end load;. Valves should be correctly positioned so that the pipeline flow direction is consistent with the direction of the medium flow arrow on the valve body or valve body flange. Due to the temperature limitation of the insulating lining material of the measuring pipe,
Locking cylinder CAC4-A63B-100/Z belongs to the Air Pressure Cylinders series under CKD company, model number CAC4-A63B-100/Z. To purchase or inquire about Locking cylinder CAC4-A63B-100/Z, you can directly contact 158 0047 0089 (Mr. He).
1. Cylinders: Used to convert the energy of compressed air into mechanical energy to produce linear motion.
2. Pneumatic valves: Used to control the direction, speed, and pressure of airflow, regulating the operation of pneumatic systems.
3. Pneumatic motors: Devices that convert compressed air into rotary motion.
4. Air tubes and connectors: Used to connect various components in pneumatic systems and transmit air.
Yes, CKD pneumatic components require regular maintenance to ensure normal operation and extend service life. Key maintenance points include:
- Regularly check and replace seals and gaskets to prevent air leakage.
- Inspect and clean filters to ensure clean air quality.
- Lubricate moving parts to reduce wear and improve efficiency.
- Check air tubes and connectors to ensure secure and undamaged connections.
When selecting the appropriate CKD pneumatic components, consider the following factors:
Application requirements: Understand the specific working environment and tasks, such as load, speed, and stroke.
Air source conditions: Ensure that the pressure and flow of the air source meet the component’s requirements.
Installation space: Confirm available space and choose components of suitable size.
Environmental factors: Consider the temperature, humidity, and potential corrosiveness of the working environment to select suitable materials and designs.
Common pneumatic system faults include:
Air leakage: Causes efficiency decline; check seals, connections, and tubes, find leak points, and repair or replace.
Stuck cylinder piston: Possibly caused by dirt or insufficient lubrication; clean the piston and add lubricant.
Valve failure: Check electrical control signals, ensure smooth airflow, and verify if the valve itself is damaged.
Insufficient pressure: Inspect air source pressure, filters, and piping to ensure no blockage or leakage.
