The medium-sized cylinder SCA2-FA-80B-70/Z uses an embedded jaw, eliminating the possibility of rotational play in the guide rail. It has a wide range of applications: it can be used as a single or double acting pneumatic gripper compression spring, to supplement and maintain gripping force, suitable for both outward and inward gripping. Positioning is achieved through locating pins and bushings, and the driver has a variety of combinations available for use in gripping and assembly technology. Pneumatic grippers are available in a variety of combinations for use in gripping and assembly technology. Connectors are used for the connection of drivers to drivers and drivers to grippers. Connecting components, 4 basic elements profile-to-profile connections as well as profile-to-driver connections, 5 installation elements making cable and hose routing more streamlined and secure, 6 motors servo and stepper motors, with or without gearboxes, – electric cylinders are available in a variety of combinations for use in gripping and assembly technology, 1 gripper blank BUB-HGPT, 16 … 80 specially matched to the gripper, for custom gripper fingers 22, 2 locating bushing ZBH, for the positioning of gripper blanks and gripper fingers. Gripper failures will directly affect the operation of the changeover valve and regulating valve. Common failures include the gripper not moving, which could be caused by several factors: if the environmental space is limited, a multi-functional solenoid valve should be chosen, as it eliminates the bypass and three manual valves and facilitates online maintenance. Depending on the type of power supply, AC and DC solenoid valves should be selected respectively. Generally, AC power is more convenient to control air flow, electric control proportional pressure reducing valves, open serial corresponding valves and other pneumatic control components, as well as cylinders and electric cylinders that can achieve simple automation at low cost are constantly being enriched. In the future, as a pioneer in pneumatic technology, we will continue to challenge ourselves to develop products that fully meet market demands. Solenoid valves 3GA119-C6-E2-3 solenoid valve 3GA119-M5-E20H-3 solenoid valve 3GA119-M5-E2H-3 solenoid valve 3GA2111-06 solenoid valve 3GA219-C6-E0-3 solenoid valve 3GA310-08-E2-1 solenoid valve 3GB1669-00-E2-3 solenoid valve 3GD110-C6-E2H-3 solenoid valve 3GD210-C8-E2H-3 solenoid valve 3GD219-06-E00-3 solenoid valve 3GD310-C10-E2H-3 solenoid valve 3GD310-C8-E2-3 solenoid valve 3PA110-M5-2 solenoid valve 3PA110-M5-3 solenoid valve 3PA110-M5-M1C2P-3 solenoid valve 3PA110-M5-PS-3-DC24V solenoid valve 3PA110-M5-PS-AC110V solenoid valve 3PA110-M5-PS-AC220V solenoid valve 3PA210-06-3 solenoid valve 3PA210-06-C2P-3 solenoid valve 3PA210-06-M1C2P-3 solenoid valve 3PA210-06-P-3 solenoid valve 3PB110-06-AC220V solenoid valve 3PB119-00-M1C2-3 solenoid valve
Medium-sized cylinder SCA2-FA-80B-70/Z belongs to the Air Pressure Cylinders series under CKD company, model number SCA2-FA-80B-70/Z. To purchase or inquire about Medium-sized cylinder SCA2-FA-80B-70/Z, you can directly contact 158 0047 0089 (Mr. He).
1. Cylinders: Used to convert the energy of compressed air into mechanical energy to produce linear motion.
2. Pneumatic valves: Used to control the direction, speed, and pressure of airflow, regulating the operation of pneumatic systems.
3. Pneumatic motors: Devices that convert compressed air into rotary motion.
4. Air tubes and connectors: Used to connect various components in pneumatic systems and transmit air.
Yes, CKD pneumatic components require regular maintenance to ensure normal operation and extend service life. Key maintenance points include:
- Regularly check and replace seals and gaskets to prevent air leakage.
- Inspect and clean filters to ensure clean air quality.
- Lubricate moving parts to reduce wear and improve efficiency.
- Check air tubes and connectors to ensure secure and undamaged connections.
When selecting the appropriate CKD pneumatic components, consider the following factors:
Application requirements: Understand the specific working environment and tasks, such as load, speed, and stroke.
Air source conditions: Ensure that the pressure and flow of the air source meet the component’s requirements.
Installation space: Confirm available space and choose components of suitable size.
Environmental factors: Consider the temperature, humidity, and potential corrosiveness of the working environment to select suitable materials and designs.
Common pneumatic system faults include:
Air leakage: Causes efficiency decline; check seals, connections, and tubes, find leak points, and repair or replace.
Stuck cylinder piston: Possibly caused by dirt or insufficient lubrication; clean the piston and add lubricant.
Valve failure: Check electrical control signals, ensure smooth airflow, and verify if the valve itself is damaged.
Insufficient pressure: Inspect air source pressure, filters, and piping to ensure no blockage or leakage.
