During the installation or maintenance of SCA2-TA-80B-25, due to the reasons of maintenance process and technology, the expansion clearance of the inner cylinder, cylinder baffle, baffle套 and steam seal套 is improper, or the expansion clearance of the ear hanging plate is improper, which results in huge expansion force and deformation of the cylinder after operation. Solution exploration: The main cause of this problem lies in the speed of the compressed fluid flow. Therefore, we can choose a low-noise proportional regulating valve to gradually decelerate the fluid medium through tortuous flow paths during throttling, thus avoiding noise caused by the flow rate exceeding the speed of sound. M-42004-06, GWS12-0/K52A-11-D0B-DM-DDAA-1BA, GWL12-0/K4KB229-00-L-AC110V/Z, GWT12-0/K4KA239-06-B-AC110V/Z, GWS12-10/KHLC-25CS, SCS2-LN-T-160/Z58D-76-501JA, CVSE2-25A-05-02HS-145A-N00-DBCA-1BA, P5142-M6B-DC24V36A-E00-JEED-1GD, HH 8×5/K92B-000-AAA, CH 8×5/K33A-L0B-RDFA-1TB, HH 10×6.5/K4KA249-06-B-AC110V/Z, CH 10×6.5/KLCG-8-20-S3DT, HH 12×8/KP5142-M6B-DC24V, CH 12×8/KDSNU-25-80-PPV-A, SRL3-LB1-32B-680/T56C-52-RA, GFGB31-3-0-12C-3CCMV10A-00ABB-01, G39D-6-P0456C-68-501BA, VNA-40-AC100V56C-53-RA M0D:0446, SME-8M-DO-24V-K-0.3-M8DSTL-B-8-80, VTUG-10-VRPT-B1T-Q10LA-UL-Q6S-19KL4F530E-15-GP-DC24V, VTUG-10-VRPT-B1T-Q10LA-UL-Q6S-4KV3000-8-W/Z, VTUG-10-VRPT-B1T-Q10LA-UL-Q6S-24KPDV3-20A-3T-DC24V/Z, VMPAL-KM-S-SD25-IP67-2.5All the above information is provided by Shanghai Jugu Pneumatic Equipment Co., Ltd., and is prohibited from being plagiarized. For more information, please contact the following customer service.
Medium-sized cylinder SCA2-TA-80B-25 belongs to the Air Pressure Cylinders series under CKD company, model number SCA2-TA-80B-25. To purchase or inquire about Medium-sized cylinder SCA2-TA-80B-25, you can directly contact 158 0047 0089 (Mr. He).
1. Cylinders: Used to convert the energy of compressed air into mechanical energy to produce linear motion.
2. Pneumatic valves: Used to control the direction, speed, and pressure of airflow, regulating the operation of pneumatic systems.
3. Pneumatic motors: Devices that convert compressed air into rotary motion.
4. Air tubes and connectors: Used to connect various components in pneumatic systems and transmit air.
Yes, CKD pneumatic components require regular maintenance to ensure normal operation and extend service life. Key maintenance points include:
- Regularly check and replace seals and gaskets to prevent air leakage.
- Inspect and clean filters to ensure clean air quality.
- Lubricate moving parts to reduce wear and improve efficiency.
- Check air tubes and connectors to ensure secure and undamaged connections.
When selecting the appropriate CKD pneumatic components, consider the following factors:
Application requirements: Understand the specific working environment and tasks, such as load, speed, and stroke.
Air source conditions: Ensure that the pressure and flow of the air source meet the component’s requirements.
Installation space: Confirm available space and choose components of suitable size.
Environmental factors: Consider the temperature, humidity, and potential corrosiveness of the working environment to select suitable materials and designs.
Common pneumatic system faults include:
Air leakage: Causes efficiency decline; check seals, connections, and tubes, find leak points, and repair or replace.
Stuck cylinder piston: Possibly caused by dirt or insufficient lubrication; clean the piston and add lubricant.
Valve failure: Check electrical control signals, ensure smooth airflow, and verify if the valve itself is damaged.
Insufficient pressure: Inspect air source pressure, filters, and piping to ensure no blockage or leakage.
