SCS2-CA-160B-879 with EB type solenoid coil, JMEBDH double solenoid control, with EB type solenoid coil, with main control signal, 1 end plate assembly NEV for sealing the air path plate base, 2 quick connect fittings QS for connecting compressed air hoses with standard outer diameter, 3 base transition plate NAW for bringing air ports 2 and 4 to the front side, 4 air path plate base NAV with air ports 2 and 4 at the bottom 2 / 1.2-72, 5 isolation piece NSC for sealing the common interface 1, 3, 5 on the air path plate base or isolating two air path plate bases to form different pressure zones, 6 intermediate plate NZV for connecting air path plate bases of different specifications 2 / 1.2-76, 7 base transition plate NAVW with air ports 2 and 4 at the bottom or front side 2 / 1.2-73, 8 muffler installed at the exhaust port. 825C-PM-502JD-675, C8000-25-W-FF182A-AF-CAA-TU-DAB3-1DA M0D:532B, SRL3-00-20B-830-M0H5-R/T116B-122JD, SRL3-00-20B-295-M0H5-D/TPV06B-A0A-46L-DDAJ-1JM M0D:PVVT, SRL3-00-20B-295183B-111JA, SCA2-FA-80B-800-T0H-D/ZPV5C-6-FJG-D-3-N/Z, SCA2-Q2-00-100B-300-H-M-N13WF129/ZAD11-15A-02H-AC100V/Z, RP1000-8-04/Z4F350E-08-TP-DC24V/Z, VFA4000-15RV3D300-90-45, STS-MTIL-L1-80-35-ET0H-D812C-PM-111CA-112, STS-MTIL-L1-80-60-ET0H-D23194, MSTG-M-16-75/KK56C-36-611BA, TMD002-8BUP-4 35A-ACA-DDFA-1BA M0D:CLSF, LMD31-10BUB-C-4R57D-51-RA, LMD31-15BUB-C-4RDVL-S-06-H66-160, LMD01-8BUB-C-4FHMF-32CS/KS, SCA2-L2T-TC-80B-335-E0-D-YB4/ZCKV2-00-25-200-U-3, SCA2-TC-63B-200-T0H3-D-IB4/Z111B-121CA, SCA2-L2T-TC-100B-500-E0-D-YB4/Z82A-AC-BKA-TM-DDAP-1DA, 4F510-15-
New Cylinder SCS2-CA-160B-879 belongs to the Air Pressure Cylinders series under CKD company, model number SCS2-CA-160B-879. To purchase or inquire about New Cylinder SCS2-CA-160B-879, you can directly contact 158 0047 0089 (Mr. He).
1. Cylinders: Used to convert the energy of compressed air into mechanical energy to produce linear motion.
2. Pneumatic valves: Used to control the direction, speed, and pressure of airflow, regulating the operation of pneumatic systems.
3. Pneumatic motors: Devices that convert compressed air into rotary motion.
4. Air tubes and connectors: Used to connect various components in pneumatic systems and transmit air.
Yes, CKD pneumatic components require regular maintenance to ensure normal operation and extend service life. Key maintenance points include:
- Regularly check and replace seals and gaskets to prevent air leakage.
- Inspect and clean filters to ensure clean air quality.
- Lubricate moving parts to reduce wear and improve efficiency.
- Check air tubes and connectors to ensure secure and undamaged connections.
When selecting the appropriate CKD pneumatic components, consider the following factors:
Application requirements: Understand the specific working environment and tasks, such as load, speed, and stroke.
Air source conditions: Ensure that the pressure and flow of the air source meet the component’s requirements.
Installation space: Confirm available space and choose components of suitable size.
Environmental factors: Consider the temperature, humidity, and potential corrosiveness of the working environment to select suitable materials and designs.
Common pneumatic system faults include:
Air leakage: Causes efficiency decline; check seals, connections, and tubes, find leak points, and repair or replace.
Stuck cylinder piston: Possibly caused by dirt or insufficient lubrication; clean the piston and add lubricant.
Valve failure: Check electrical control signals, ensure smooth airflow, and verify if the valve itself is damaged.
Insufficient pressure: Inspect air source pressure, filters, and piping to ensure no blockage or leakage.
