The new type of cylinder SCS2-N-CB-160B-620-JI; under the condition that the contact surface is constant, the greater the installation torque, the smaller the hysteresis. Similarly, if the weighing sensor is installed on different equipment, the size of the installation torque also directly affects the true accuracy of the product. The influence law of installation torque on different structural products is not the same. For example, some cantilever beam sensors, when the installation torque is 100Nm, can achieve better hysteresis. Too large or too small torque, hysteresis will become worse. The hysteresis of the wheel spoke type sensor is more sensitive to the installation torque, so when using the pressure sensor, it is necessary to install it according to the manufacturer's installation and use instructions to ensure product quality. Its size determines the usability of the measurement results. The smaller the measurement uncertainty, the closer the measurement result is to the true value, the higher the quality, the higher the usability; on the contrary, the larger the measurement uncertainty, the more the measurement result deviates from the true value, the lower the quality, the lower the usability. Therefore, when the measurement result is given with the uncertainty, it is complete and meaningful. The measurement uncertainty must be correctly assessed; if the uncertainty assessment is too large, it will cause low measurement quality and require reinvestment, causing waste; if the uncertainty assessment is too small, it will cause harm to production and scientific research work. 1. Operating torque: Operating torque is the main parameter for selecting valve electric devices. The output torque of the electric device should be 1.2 to 1.5 times the valve operating torque. German cylinder piston rod replacement process; buffer capacity ADN-...-P, advantage no adjustment to save time, advantage no adjustment buffer capacity is four times higher than ADN-...-P, saving time and reducing noise, compact cylinder ADN, in line with ISO21287 main characteristics, modular product system derivative type symbol main characteristics brief description S1 Reinforced piston rod to improve lateral force. The lateral force that can be absorbed is several times that of a basic type cylinder, S2 Double-ended piston rod for work at both ends, the force of the advancing and returning stroke is the same, used for installing external stops, S6 High-temperature resistant sealing parts can withstand up to 120°C, S10 Piston low-speed constant speed motion (slow) suitable for constant, no jitter speed slow motion throughout the entire stroke of the cylinder. Sealing parts contain silicone oil (including paint wetting defect material) S11 Low friction special sealing parts can greatly reduce system wear. It is equivalent to greatly reducing the response pressure. Sealing parts contain silicone oil (including paint wetting defect material), S20 Double-ended hollow piston rod for supplying vacuum, small parts, media, etc., K2 Extended piston rod external thread -, K5 Special piston rod thread metric standard thread in line with ISO, K8 Extended piston rod -, K10 Smooth anodized aluminum piston rod specially used for welding environments: - anti-weld slag - small workload - compared with steel, higher surface hardness - long service life KP With clamping device piston rod integrated clamping device, EL With end position lock positively locks the end position, as drop protection. If there is a pressure drop, the piston rod is fixed at the end position 2, sealed all-metal steel strip slider MEDAN rodless cylinder is used on the slider
New type cylinder SCS2-N-CB-160B-620-JI belongs to the Air Pressure Cylinders series under CKD company, model number SCS2-N-CB-160B-620-JI. To purchase or inquire about New type cylinder SCS2-N-CB-160B-620-JI, you can directly contact 158 0047 0089 (Mr. He).
1. Cylinders: Used to convert the energy of compressed air into mechanical energy to produce linear motion.
2. Pneumatic valves: Used to control the direction, speed, and pressure of airflow, regulating the operation of pneumatic systems.
3. Pneumatic motors: Devices that convert compressed air into rotary motion.
4. Air tubes and connectors: Used to connect various components in pneumatic systems and transmit air.
Yes, CKD pneumatic components require regular maintenance to ensure normal operation and extend service life. Key maintenance points include:
- Regularly check and replace seals and gaskets to prevent air leakage.
- Inspect and clean filters to ensure clean air quality.
- Lubricate moving parts to reduce wear and improve efficiency.
- Check air tubes and connectors to ensure secure and undamaged connections.
When selecting the appropriate CKD pneumatic components, consider the following factors:
Application requirements: Understand the specific working environment and tasks, such as load, speed, and stroke.
Air source conditions: Ensure that the pressure and flow of the air source meet the component’s requirements.
Installation space: Confirm available space and choose components of suitable size.
Environmental factors: Consider the temperature, humidity, and potential corrosiveness of the working environment to select suitable materials and designs.
Common pneumatic system faults include:
Air leakage: Causes efficiency decline; check seals, connections, and tubes, find leak points, and repair or replace.
Stuck cylinder piston: Possibly caused by dirt or insufficient lubrication; clean the piston and add lubricant.
Valve failure: Check electrical control signals, ensure smooth airflow, and verify if the valve itself is damaged.
Insufficient pressure: Inspect air source pressure, filters, and piping to ensure no blockage or leakage.
