CKD Repair Kit SRL2-63K-800 Compressed air 0.71.055～6050～2000 (when using standard air port piping) (Note 1) Do not use air buffer (When oiling, use only one type of turbine oil ISOVG32. Once oiling has started, please continue to oil.) φ12 φ16 φ20 φ25 φ32 φ40 Note 1: The piston speed when using centralized air port piping varies depending on the stroke, please consult with our company separately. Note 2: For low-pressure specification 'LP' (φ12～φ20), the pressure is 0.1MPa. Selection precautions Note 1: When the cylinder diameter is 12, 16, 20, 25, 32 and the option symbol is 'R' or 'T', the installation form becomes '00' or 'LB'. (When the option symbol is 'R' or 'T', sometimes the installation form 'LB' cannot be piped, therefore it cannot be manufactured.) Note 2: There are also switches other than the switch model. (Made to order) For details, please refer to page 1 at the end of the volume. Note 3: The symbol ※ in L※, N※ indicates the number of sets. When 2 sets are needed, fill in 'L2' (for LB) or 'N2' (for LB1), 2 sets per 1 set. Note 4: For the symbol indicating the air port, buffer valve needle position, please refer to the dimensional drawings on pages 1762～1767. Note 5: φ12～φ25 standard types cannot be retrofitted with full stroke adjustment parts. 'A3' is an option for the nut of the full stroke adjustment part installation plate. Note 6: 'H' indicates that the thread size for φ12, φ16 is 'M4', and the thread size for φ20 is 'M5'. Note 7: Please confirm the matching of options through the 'Option Matching Table' on the next page. APK11-25A-N4H-AC200VSSD-L-40-25-T0H-D-N1126-12C-F1126-ELEMENTADK11-20A-02E-DC24V4F310-10-AC200VSCA2-CA-50B-50SCA2-CA-100B-100SCA2-CB-50B-100SRL2-63K-800 Repair KitW4000-15-FSTG-B-25-304KA210-06-DC24V4F310E-08-TP-DC24V4F310E-10-TP-AC200VPVS-32A-210-AC220VMN-25-AC100VJSC3-N-TC-125B-250CMK2-00-32-75CHL-H66SW-T0H3PB119-00-M1-3SW-S0CKD Repair Kit, /
Repair Kit SRL2-63K-800 belongs to the Auxiliary Devices series under CKD company, model number SRL2-63K-800. To purchase or inquire about Repair Kit SRL2-63K-800, you can directly contact 158 0047 0089 (Mr. He).
1. Cylinders: Used to convert the energy of compressed air into mechanical energy to produce linear motion.
2. Pneumatic valves: Used to control the direction, speed, and pressure of airflow, regulating the operation of pneumatic systems.
3. Pneumatic motors: Devices that convert compressed air into rotary motion.
4. Air tubes and connectors: Used to connect various components in pneumatic systems and transmit air.
Yes, CKD pneumatic components require regular maintenance to ensure normal operation and extend service life. Key maintenance points include:
- Regularly check and replace seals and gaskets to prevent air leakage.
- Inspect and clean filters to ensure clean air quality.
- Lubricate moving parts to reduce wear and improve efficiency.
- Check air tubes and connectors to ensure secure and undamaged connections.
When selecting the appropriate CKD pneumatic components, consider the following factors:
Application requirements: Understand the specific working environment and tasks, such as load, speed, and stroke.
Air source conditions: Ensure that the pressure and flow of the air source meet the component’s requirements.
Installation space: Confirm available space and choose components of suitable size.
Environmental factors: Consider the temperature, humidity, and potential corrosiveness of the working environment to select suitable materials and designs.
Common pneumatic system faults include:
Air leakage: Causes efficiency decline; check seals, connections, and tubes, find leak points, and repair or replace.
Stuck cylinder piston: Possibly caused by dirt or insufficient lubrication; clean the piston and add lubricant.
Valve failure: Check electrical control signals, ensure smooth airflow, and verify if the valve itself is damaged.
Insufficient pressure: Inspect air source pressure, filters, and piping to ensure no blockage or leakage.
