The rodless cylinder SRT3-LB-63B-600-Y must use rodless cylinder gaskets that match the specifications and thickness of the original rodless cylinder, with a smooth surface. Rodless cylinder gaskets should not be reused, but if reuse is necessary, they must be boiled in waste oil at 100°C for about 0.5 hours. The minimum working pressure difference above 0.04Mpa allows the use of indirect pilot type; the minimum working pressure difference close to or less than zero must use direct acting or step direct type. The main products include the backlight tube manufacturing system, three-dimensional solder paste printing inspection machine and automatic drug packaging system used in automation machinery products, as well as precision system components, fluid control components, labor-saving components, pneumatic components in electronic components products, including intensive process gas supply system (IGS), vacuum proportional control system, drug liquid valve, direct acting two/three-way valve, cooling liquid valve, medical analysis valve, direct drive motor, intermittent rotary table, guided cylinder, cylinder, rodless cylinder, electric cylinder, pneumatic three/five-way valve, serial transmission control valve, clean room F.R., F.R.L components, flow sensor, digital electronic control proportional pressure reducing valve, air dryer, precision components, etc. In addition to providing a variety of standard pneumatic products, we also customize products for customers to meet their needs for special solutions. In advanced industries such as semiconductors and liquid crystals, control equipment is required to be used in ultra-pure environments. Liquid drug control components, process gas process control components, high vacuum control components, etc., from the gas supply system to the exhaust system related to chip manufacturing equipment, in order to infinitely guarantee high purity and high precision for customers, we continuously challenge the 'ultra-high level process control'
One of the important pillars of the technical field is the unit and system capable of controlling and flexibly using water, air, gas, steam, and oil. Not only various valves and unit system components, but also greening sprinkler systems and dust removal control systems, gas combustion systems, various cleaning devices, and water treatment systems, etc., the field we can engage in research and development is infinitely wide. High quality and rich variety, this is the concept of liquid control equipment. Based on the theme of automation development and manufacturing for many years 'higher precision, faster and lower cost', plus our own views and technical strength, we have created this demand-intensive product. A rich variety of products such as rotary tables, direct drive motors, transfer work units, etc., meet various conditions such as controllability, output, rigidity, high-speed performance, and perfection in the most suitable form. In response to the background of flow control cleaning and environmental protection, energy saving, and various other needs, a rich variety of products have been launched. In the development and manufacturing of the 'F.R.L unit' and 'air dryer' as the main cleaning system and pneumatic auxiliary components, we fully utilize the relevant rich practical achievements and technical expertise to continuously expand the system peripheral equipment. Pneumatic control components such as electric control proportional pressure reducing valves and open serial corresponding valves that control air flow, as well as cylinders and electric cylinders that can achieve automation simply and at low cost, are constantly being enriched. In the future, we will also continue to challenge product development that fully meets market needs as pioneers in pneumatic technology.
The types of solenoid valves are as follows: solenoid valve
Rodless cylinder SRT3-LB-63B-600-Y belongs to the Air Pressure Cylinders series under CKD company, model number SRT3-LB-63B-600-Y. To purchase or inquire about Rodless cylinder SRT3-LB-63B-600-Y, you can directly contact 158 0047 0089 (Mr. He).
1. Cylinders: Used to convert the energy of compressed air into mechanical energy to produce linear motion.
2. Pneumatic valves: Used to control the direction, speed, and pressure of airflow, regulating the operation of pneumatic systems.
3. Pneumatic motors: Devices that convert compressed air into rotary motion.
4. Air tubes and connectors: Used to connect various components in pneumatic systems and transmit air.
Yes, CKD pneumatic components require regular maintenance to ensure normal operation and extend service life. Key maintenance points include:
- Regularly check and replace seals and gaskets to prevent air leakage.
- Inspect and clean filters to ensure clean air quality.
- Lubricate moving parts to reduce wear and improve efficiency.
- Check air tubes and connectors to ensure secure and undamaged connections.
When selecting the appropriate CKD pneumatic components, consider the following factors:
Application requirements: Understand the specific working environment and tasks, such as load, speed, and stroke.
Air source conditions: Ensure that the pressure and flow of the air source meet the component’s requirements.
Installation space: Confirm available space and choose components of suitable size.
Environmental factors: Consider the temperature, humidity, and potential corrosiveness of the working environment to select suitable materials and designs.
Common pneumatic system faults include:
Air leakage: Causes efficiency decline; check seals, connections, and tubes, find leak points, and repair or replace.
Stuck cylinder piston: Possibly caused by dirt or insufficient lubrication; clean the piston and add lubricant.
Valve failure: Check electrical control signals, ensure smooth airflow, and verify if the valve itself is damaged.
Insufficient pressure: Inspect air source pressure, filters, and piping to ensure no blockage or leakage.
