festoGuide cylinderDFM-100-50-P-A-KFFor uncoated metal pipes, when the age exceeds 5-10 years, the dirt has reached the level of deteriorating water quality. For systems with poor corrosion protection, corrosion phenomena begin to appear after 3-5 years. Currently, in the water supply pipes of dark rod elastic seat gate valves, almost all metal pipes are subject to varying degrees of corrosion, especially prominent external corrosion. Electric valve torque control is not easy,容易产生内漏，甚至拉断valve rod head; electromagnetic valve structure is easy to control internal leakage, down to zero. Therefore, electromagnetic valves are particularly safe to use, especially suitable for corrosive, toxic or high and low temperature media. 3. Installation error issues Installation errors, such as incorrect installation direction, wiring errors, etc., can cause the electromagnetic valve to fail to work properly, and in severe cases, can cause damage to the components of the electromagnetic valve, such as the valve core or other interfaces. 2. The exhaust port of the pressure reducing valve leaks, which is due to the aging of the sealing ring at the sealing point between the two moving parts and the cylinder body inside the pressure reducing valve. The correct selection of electromagnetic valves should be based on: In cases where the rigidity of the mechanical device cannot be fully obtained, installing a virtual inertia near the motor can suppress the resonance of the mechanical device. The following is an example of adding virtual inertia. When connected by belts, gears, spline shafts, etc., using keys, the size of the virtual inertia is roughly [load inertia] × (0.5~2). When changing speed through belts, gears, etc., the load inertia needs to be converted to the German electromagnetic valve has the characteristics of simple structure, reliable operation, subtle invasion, fire and explosion prevention, and low price, and is widely used in papermaking and other chemical industries. German electromagnetic valves have the characteristic of high adjustment accuracy, and are used in some special occasions with high adjustment accuracy requirements. In the papermaking and chemical industries, German electromagnetic valves are rarely used. Since the working characteristics and utilization rate of German electromagnetic valves depend on the type of valve, the working specifications of the device, and the location of the valve on the pipeline or equipment. Therefore, mastering the correct selection of valve electric devices; considering the prevention of overloading (operating torque higher than control torque) becomes a crucial link. The solution to the vibration and noise of the guiding cylinder; because the guiding cylinder has a vibration source around it, and this vibration source is very close to the fixed frequency of the regulating valve, problems such as resonance may occur. Solution exploration: I tried to first clear the suspected vibration sources near the guiding cylinder, and elimination can also be done using the exclusion method, of course, after elimination, there may also be situations where the vibration source cannot be cleared, then we can adopt the following methods, for example, when there is slight resonance, we can increase the rigidity of the valve or increase the damping, or replace the throttle parts or change the shape of the throttle parts, if the vibration is very severe, we need to use the replacement of the regulating valve's throttling form, at the same time we need to know that different structural forms of valves have different working frequencies, in addition, the vibration of the pipeline and valve seat can be eliminated by increasing the support points. festoGuide cylinderDFM-100-50-P-A-K
Guided Cylinder DFM-100-50-P-A-KF belongs to the Air Pressure Cylinders series under CKD company, model number DFM-100-50-P-A-KF. To purchase or inquire about Guided Cylinder DFM-100-50-P-A-KF, you can directly contact 158 0047 0089 (Mr. He).
1. Cylinders: Used to convert the energy of compressed air into mechanical energy to produce linear motion.
2. Pneumatic valves: Used to control the direction, speed, and pressure of airflow, regulating the operation of pneumatic systems.
3. Pneumatic motors: Devices that convert compressed air into rotary motion.
4. Air tubes and connectors: Used to connect various components in pneumatic systems and transmit air.
Yes, CKD pneumatic components require regular maintenance to ensure normal operation and extend service life. Key maintenance points include:
- Regularly check and replace seals and gaskets to prevent air leakage.
- Inspect and clean filters to ensure clean air quality.
- Lubricate moving parts to reduce wear and improve efficiency.
- Check air tubes and connectors to ensure secure and undamaged connections.
When selecting the appropriate CKD pneumatic components, consider the following factors:
Application requirements: Understand the specific working environment and tasks, such as load, speed, and stroke.
Air source conditions: Ensure that the pressure and flow of the air source meet the component’s requirements.
Installation space: Confirm available space and choose components of suitable size.
Environmental factors: Consider the temperature, humidity, and potential corrosiveness of the working environment to select suitable materials and designs.
Common pneumatic system faults include:
Air leakage: Causes efficiency decline; check seals, connections, and tubes, find leak points, and repair or replace.
Stuck cylinder piston: Possibly caused by dirt or insufficient lubrication; clean the piston and add lubricant.
Valve failure: Check electrical control signals, ensure smooth airflow, and verify if the valve itself is damaged.
Insufficient pressure: Inspect air source pressure, filters, and piping to ensure no blockage or leakage.
