CKD Chikai (CKD) Locking Cylinder CAC4-A-63-150-T2YD3-D

CAC4-A-63-150-T2YD3-D; during installation, the arrow on the valve body should be aligned with the direction of the medium flow. The vehicle single-wheel hydraulic control system is shown in Figure 1. Figure 1 The vehicle single-wheel hydraulic control system The 'increase-keep-decrease' three types of braking pressure of the wheel cylinder are achieved by the interaction of three forces (spring force, electromagnetic force, and fluid force) acting on the piston inside the solenoid valve, as shown in Figure 2. Introduction to the advantages and disadvantages of the pressure sensor working principle; five types of pressure measurement ranges, measuring relative pressure or pressure difference, switch output PNP, NPN, and with analog current or voltage output, LCD or backlit LCD display, various connections and installation methods to choose from, air interface and assembly R18 external thread R x, installed on the air source processing unit R14 external thread R, installed on the air source processing unit MS4 directly connected to the MS4 series air source processing unit MS6 directly connected to the MS6 series air source processing unit H18 internal thread Gx, used for DIN H rail mounting W18 internal thread Gx, used for wall or flat mounting FQ4 quick connect fitting QS-4, used for front panel mounting HQ4 quick connect fitting QS-4, used for DIN H rail mounting WQ4 quick connect fitting QS-4, used for wall or flat mounting. Display and adjustment, C LCD display, with backlight (optimized operation) L backlit LCD display (helpful for reading data), electrical output P1 1 switch output, PNP P2 2 switch outputs 1 switch output PNP and 0 … 10 V analog output PI 1 switch output, PNP and 4 … 20 mA analog output 2I 2 switch outputs PNP and 4 … 20 mA analog output N1 1 switch output NPN N2 2 switch outputs NPN NU 1 switch output NPN and 0 … 10 V analog output NI 1 switch output NPN and 4 … 20 mA analog output, display method backlight, LCD backlit LCD accuracy FS1) ±2% setting options teaching, installation method installed via DIN H rail mounting installed via wall/flat bracket mounting installed on the air source processing unit front panel mounting, electrical parameters switch output PNP NPN analog output [V] 0 … 10 [mA] 4 … 20 switch component function normally open or normally closed contact switch function freely programmable operating voltage range DC [V] 15 … 30 maximum output current [mA] 150 electrical interface plug M8x1, circular structure in accordance with EN 60 947-5-2 standard plug M12x1, circular structure in accordance with EN 60 947-5-2 standard short-circuit protection pulse type polarity reversal protection applicable to all electrical interfaces. When measuring mixed media, if the mixing is not

Locking cylinder CAC4-A-63-150-T2YD3-D belongs to the Air Pressure Cylinders series under CKD company, model number CAC4-A-63-150-T2YD3-D. To purchase or inquire about Locking cylinder CAC4-A-63-150-T2YD3-D, you can directly contact 158 0047 0089 (Mr. He).

FAQ

What is the basic function of CKD pneumatic components?

CKD pneumatic components use compressed air as a power source to transmit and convert forces. They can be used to control machine movements, transmit force, or achieve automation. Common pneumatic components include cylinders, pneumatic valves, and pneumatic motors.
What are the main types of CKD pneumatic components?

1. Cylinders: Used to convert the energy of compressed air into mechanical energy to produce linear motion.

2. Pneumatic valves: Used to control the direction, speed, and pressure of airflow, regulating the operation of pneumatic systems.

3. Pneumatic motors: Devices that convert compressed air into rotary motion.

4. Air tubes and connectors: Used to connect various components in pneumatic systems and transmit air.
Do CKD pneumatic components require regular maintenance? If yes, what are the key points?

Yes, CKD pneumatic components require regular maintenance to ensure normal operation and extend service life. Key maintenance points include:

- Regularly check and replace seals and gaskets to prevent air leakage.

- Inspect and clean filters to ensure clean air quality.

- Lubricate moving parts to reduce wear and improve efficiency.

- Check air tubes and connectors to ensure secure and undamaged connections.
How to choose the right CKD pneumatic components?

When selecting the appropriate CKD pneumatic components, consider the following factors:

Application requirements: Understand the specific working environment and tasks, such as load, speed, and stroke.

Air source conditions: Ensure that the pressure and flow of the air source meet the component’s requirements.

Installation space: Confirm available space and choose components of suitable size.

Environmental factors: Consider the temperature, humidity, and potential corrosiveness of the working environment to select suitable materials and designs.
What are common faults in CKD pneumatic component systems and how to troubleshoot?

Common pneumatic system faults include:

Air leakage: Causes efficiency decline; check seals, connections, and tubes, find leak points, and repair or replace.

Stuck cylinder piston: Possibly caused by dirt or insufficient lubrication; clean the piston and add lubricant.

Valve failure: Check electrical control signals, ensure smooth airflow, and verify if the valve itself is damaged.

Insufficient pressure: Inspect air source pressure, filters, and piping to ensure no blockage or leakage.