New type of cylinder SCS2-TC-160B-710; if users continue to use勉强ly or without knowledge, it is equally easy to cause rodless cylinder valve core failure issues. Main information Compared to the stroke, the installation length is compact. Load and equipment can be directly installed on the slider. Three buffering forms are optional: - Elastic buffer - Pneumatic buffer - Hydraulic buffer All settings can be completed from one side: - Precision end position adjustment, - Installation of proximity switches - Cylinder installation - Speed adjustment - Pneumatic end position buffer Sealing system, cover strip sealing strip The advantages of the sealing system: - Long stroke, unlimited - Almost no leakage, optional: NSF-H1 lubricant, for the food industry Rodless cylinders have limitations in food safety. For more information, an overview without guide rods, suitable for simple drive methods Compact - Installation length and stroke related, can be fully interchangeable with rodless cylinders DGP, easy installation and integration Options: - Standard piston - Extended piston Sealing system sealing strip, the advantages of the sealing system: - Unlimited stroke length - True zero leakage, options: NSF-H1 lubricant for the food industry, rodless cylinders have limited practicality in the food industry. More suitable for food industry applications Manufacturer's description, rich derivatives Compact type DGC-K Basic type DGC-G, cylinder diameter 18 ... 80 mm Stroke length 1 ... 8,500 mm 30% narrower than DGC-G, suitable for small loads Symmetrical design, cylinder diameter 8 ... 63 mm Stroke length 1 ... 8,500 mm Guide clearance = 0.2 mm Suitable for small loads With torque load, the running performance is average, sliding bearing guide DGC-GF Cylindrical roller bearing guide DGC-KF, cylinder diameter 18 ... 63 mm Stroke length 1 ... 8,500 mm Guide clearance = 0.05 mm Suitable for small and medium loads With torque load, the running performance is average Cylinder diameter 8 ... 63 mm Stroke length 1 ... 8,500 mm Guide clearance = 0 mm Suitable for medium and large loads With stainless steel slider precise connection With torque load, the running performance is very good, heavy-duty guide DGC-HD Passive guide shaft DGC-FA, cylinder diameter 18, 25, 40 mm Stroke length 10 ... 5,000 mm Guide clearance = 0 mm Suitable for large loads With torque load, the running performance is very good, without drive Cylinder diameter 8 ... 63 mm Stroke length 1 ... 8,500 mm Guide clearance = 0 mm High precision guide shaft, suitable for DGC-KF. Can be used as machine parts or form a double guide shaft with DGC-KF. D2 - Double end air intake, standard configuration of rodless cylinder DGC-K's air inlet is located on the end cap. Replace the actuator's seal. 2. Replace the seal on the cylinder. 3. Adjust the air pressure of the pressure reducing valve to 3-5
New type cylinder SCS2-TC-160B-710 belongs to the Air Pressure Cylinders series under CKD company, model number SCS2-TC-160B-710. To purchase or inquire about New type cylinder SCS2-TC-160B-710, you can directly contact 158 0047 0089 (Mr. He).
1. Cylinders: Used to convert the energy of compressed air into mechanical energy to produce linear motion.
2. Pneumatic valves: Used to control the direction, speed, and pressure of airflow, regulating the operation of pneumatic systems.
3. Pneumatic motors: Devices that convert compressed air into rotary motion.
4. Air tubes and connectors: Used to connect various components in pneumatic systems and transmit air.
Yes, CKD pneumatic components require regular maintenance to ensure normal operation and extend service life. Key maintenance points include:
- Regularly check and replace seals and gaskets to prevent air leakage.
- Inspect and clean filters to ensure clean air quality.
- Lubricate moving parts to reduce wear and improve efficiency.
- Check air tubes and connectors to ensure secure and undamaged connections.
When selecting the appropriate CKD pneumatic components, consider the following factors:
Application requirements: Understand the specific working environment and tasks, such as load, speed, and stroke.
Air source conditions: Ensure that the pressure and flow of the air source meet the component’s requirements.
Installation space: Confirm available space and choose components of suitable size.
Environmental factors: Consider the temperature, humidity, and potential corrosiveness of the working environment to select suitable materials and designs.
Common pneumatic system faults include:
Air leakage: Causes efficiency decline; check seals, connections, and tubes, find leak points, and repair or replace.
Stuck cylinder piston: Possibly caused by dirt or insufficient lubrication; clean the piston and add lubricant.
Valve failure: Check electrical control signals, ensure smooth airflow, and verify if the valve itself is damaged.
Insufficient pressure: Inspect air source pressure, filters, and piping to ensure no blockage or leakage.
