The festo pneumatic gripper HGPT-63-A-B has a pneumatic control method with the air source port and the pulse control valve on the same axis. The rated size, Lavalle nozzle 0.7 mm width size 10 mm, can be mounted in any position. The characteristics of the ejector are high vacuum standard design structure T-shape. The working pressure at the maximum suction flow rate is 2.1 bar, the working pressure range is 1 ... 8 bar, and the working pressure at the maximum vacuum is 4.7 bar. The maximum vacuum is 88%, the rated working air pressure is 6 bar, and the maximum suction flow rate with respect to the atmosphere is 16 l/min. The supply time at the nominal working pressure is 1.9 s. The working medium is compressed air in compliance with, and the instructions for the working and pilot medium state that lubricated compressed air must not be used. The corrosion resistance level is CRC1 – low corrosion impact. The medium temperature is 0 ... 60 °C, the ambient temperature is 0 ... 60 °C, and the maximum tightening torque is 0.5 Nm. The product weight is 15 g. The installation type is with through hole, with accessories. Pneumatic connection, air port 1 QS-4, pneumatic connection, air port 3 QS-4, vacuum interface QS-4. The material note indicates that it does not contain brass and PTFE, and complies with RoHS. Material information, seal NBR. Material information, receiver nozzle POM. Material information, housing POM-reinforced. Material information, emitter nozzle forged aluminum alloy. Material information, joint brass, nickel-plated. Vacuum generator, main features product overview vacuum generator All vacuum generators are single-stage structures, based on the Venturi principle. The product series described below has a very wide range of applications. A single series provides different performance levels, grades, and can be selected according to characteristic requirements. Standard and tubular ejectors VN-… ? 13? Nominal diameter 0.45 … 3 mm, maximum vacuum 93%, temperature range 0 … +60 °C? A highly efficient vacuum generator, direct, for work areas can provide a series of straight or T-shaped housings. Low space requirements, low cost, no consumables, very short evacuation time? Vacuum switch (optional) Optional additional functions:– Integrated injection pulse– Vacuum electronic control ON/OFF– Injection pulse and control combination, VAD-…/VAK-… Technical parameters, vad nominal diameter? Nominal diameter 0.45 … 3 mm, maximum vacuum 84%, temperature range 0 … +60°C Compact structure, very small installation space required, short response time, built-in solenoid valve (open/close), VADMI-…: Additional built-in solenoid valve for injection pulse with display filter throttling function (optional) Vacuum switch (optional), reliable放下工件VAD-M-…/VAD-M…-I-… Technical parameters, nominal diameter 0.7 … 2 mm, maximum vacuum 85%, temperature range 0 … +40 °C Compact structure, very small installation space required, short response time, built-in solenoid valve (open/close) AD-M-I-…: Additional built-in solenoid valve for injection pulse Reliable放下工件0.5 … 1.5 mm? The vacuum generator can achieve a maximum vacuum of 93% Six nominal diameters Lavalle nozzle three-piece set when there is no invasion protection
Pneumatic gripper HGPT-63-A-B belongs to the Clamping Jaws, Clamping Plates series under CKD company, model number HGPT-63-A-B. To purchase or inquire about Pneumatic gripper HGPT-63-A-B, you can directly contact 158 0047 0089 (Mr. He).
1. Cylinders: Used to convert the energy of compressed air into mechanical energy to produce linear motion.
2. Pneumatic valves: Used to control the direction, speed, and pressure of airflow, regulating the operation of pneumatic systems.
3. Pneumatic motors: Devices that convert compressed air into rotary motion.
4. Air tubes and connectors: Used to connect various components in pneumatic systems and transmit air.
Yes, CKD pneumatic components require regular maintenance to ensure normal operation and extend service life. Key maintenance points include:
- Regularly check and replace seals and gaskets to prevent air leakage.
- Inspect and clean filters to ensure clean air quality.
- Lubricate moving parts to reduce wear and improve efficiency.
- Check air tubes and connectors to ensure secure and undamaged connections.
When selecting the appropriate CKD pneumatic components, consider the following factors:
Application requirements: Understand the specific working environment and tasks, such as load, speed, and stroke.
Air source conditions: Ensure that the pressure and flow of the air source meet the component’s requirements.
Installation space: Confirm available space and choose components of suitable size.
Environmental factors: Consider the temperature, humidity, and potential corrosiveness of the working environment to select suitable materials and designs.
Common pneumatic system faults include:
Air leakage: Causes efficiency decline; check seals, connections, and tubes, find leak points, and repair or replace.
Stuck cylinder piston: Possibly caused by dirt or insufficient lubrication; clean the piston and add lubricant.
Valve failure: Check electrical control signals, ensure smooth airflow, and verify if the valve itself is damaged.
Insufficient pressure: Inspect air source pressure, filters, and piping to ensure no blockage or leakage.
