The festo pneumatic gripper HGPT-20-A-B features fully automatic condensate drainage with optional filter: 5 μm or 40 μm filter new product 30. It is recommended to use the following oil types for the components: viscosity range that matches, 32 mm2/s (= cSt), 40 °C working medium compressed air, structural features include filter regulator valve, with/without pressure gauge, proportional standard oil mist lubricator installation method via accessories, tubular installation installation position vertical ±5° pressure reducing valve lock rotary handle, with lock, CRC2: corrosion resistance level 2, in compliance with standard 940 070, the components must have a certain degree of corrosion resistance. External visible components have a basic coating surface, which can be directly in contact with industrial environments or with coolants, lubricants, and other media. 1 Housing precision aluminum alloy die-cast zinc 2 Connecting plates precision aluminum alloy die-cast zinc/aluminum 3 Filter cup polycarbonate polycarbonate 4 Metal protective cover – aluminum 5 Adjustment handle polyacetylene polyacetylene 6 Knurled nut precision aluminum alloy aluminum 7 Support polycarbonate –– Sealing elements nitrile rubber Second, the slight pulsation of the polyurethane air pipe cover; this slight pulsation causes the relaxation and compression process of the rodless cylinder cover gasket, thereby accelerating the damage to the polyurethane air pipe cover gasket and affecting its sealing performance. Therefore, this practical new technology does not install soft and hard multi-layer seals on the valve plate as in existing technologies, but is directly installed on the valve body, and adding an adjusting ring between the pressure plate and valve seat is an ideal bidirectional hard sealing method. It can replace gate valves and ball valves. Ball valves are widely used in the petroleum, chemical, metallurgical, and urban central heating industries. However, ball valves with sealing pairs made of PTFE polymer materials cannot be used in conditions where the temperature is greater than 280°C or the transport medium is in the form of tiny particles. Ball valves with sealing pairs made of metal materials, when rotating the ball, various situations arise due to different structures. (2) The system is simple, easy to connect to computers, and inexpensive. The solenoid valve itself has a simple structure and is inexpensive, making it easier to install and maintain than other types of actuators such as regulating valves. What is more significant is that the组成的自控系统 is much simpler and cheaper. Since the solenoid valve is controlled by a switching signal, it is very convenient to connect with industrial control computers. In today's era of computer proliferation and significant price drops, the advantages of solenoid valves are even more pronounced. (5) Prepare blanking plates and screws, etc., for use after shutting down the furnace and other connection systems are isolated. Corrosion resistance: the valve body is coated with powder epoxy resin, which can prevent corrosion and rusting of the valve body and can be used in sewage systems. Since the universal valve island itself has air cushioning, many friends think that no additional buffer device is needed, which saves costs. In fact, this idea is a misconception. The reason is as follows: When the cylinder body 2 rotates from the lowest position shown in the figure upwards, the plunger 5 extends outwards, the sealing volume of the plunger hole 6 increases, forming a local vacuum, and the oil in the oil tank is sucked into the plunger hole 6, which is the oil suction process; When the cylinder body 2 drives the plunger 5 to rotate from the highest position shown in the figure downwards, the plunger 5 is pressed into the plunger hole 6, the sealing volume inside the plunger hole 6 decreases, and the oil inside is squeezed out, which is the oil pressure process.
Pneumatic gripper HGPT-20-A-B belongs to the Clamping Jaws, Clamping Plates series under CKD company, model number HGPT-20-A-B. To purchase or inquire about Pneumatic gripper HGPT-20-A-B, you can directly contact 158 0047 0089 (Mr. He).
1. Cylinders: Used to convert the energy of compressed air into mechanical energy to produce linear motion.
2. Pneumatic valves: Used to control the direction, speed, and pressure of airflow, regulating the operation of pneumatic systems.
3. Pneumatic motors: Devices that convert compressed air into rotary motion.
4. Air tubes and connectors: Used to connect various components in pneumatic systems and transmit air.
Yes, CKD pneumatic components require regular maintenance to ensure normal operation and extend service life. Key maintenance points include:
- Regularly check and replace seals and gaskets to prevent air leakage.
- Inspect and clean filters to ensure clean air quality.
- Lubricate moving parts to reduce wear and improve efficiency.
- Check air tubes and connectors to ensure secure and undamaged connections.
When selecting the appropriate CKD pneumatic components, consider the following factors:
Application requirements: Understand the specific working environment and tasks, such as load, speed, and stroke.
Air source conditions: Ensure that the pressure and flow of the air source meet the component’s requirements.
Installation space: Confirm available space and choose components of suitable size.
Environmental factors: Consider the temperature, humidity, and potential corrosiveness of the working environment to select suitable materials and designs.
Common pneumatic system faults include:
Air leakage: Causes efficiency decline; check seals, connections, and tubes, find leak points, and repair or replace.
Stuck cylinder piston: Possibly caused by dirt or insufficient lubrication; clean the piston and add lubricant.
Valve failure: Check electrical control signals, ensure smooth airflow, and verify if the valve itself is damaged.
Insufficient pressure: Inspect air source pressure, filters, and piping to ensure no blockage or leakage.
